During the use of the conveyor belt,it is inevitable that it will be worn.If it is used properly,the service life of the conveyor belt will be increased several times.As a professional conveyor belt manufacturer,Baoding Hongqiang introduces several methods to reduce the wear of the conveyor belt:

 

　　點：在輸送帶運轉中防止輸送帶負荷啟動；

 

　　The first point:prevent the load start of the conveyor belt during the operation of the conveyor belt;

 

　　第二點：我們必須保障避免托輥被物料覆蓋，造成回轉不靈，防止漏料卡于滾筒與膠帶之間，注意輸送帶活動部分的潤滑，但不得油污輸送帶，這個是從它自身的工作環境來考慮的；

 

　　Second point:we must ensure that the idler is not covered by materials,resulting in poor rotation,prevent material leakage from being stuck between the drum and the belt,and pay attention to the lubrication of the moving part of the conveyor belt,but do not oil the conveyor belt.This is considered from its own working environment;

 

　　第三點：如果輸送帶發生跑偏，我們必須應該及時采取措施糾正，避免輸送帶邊刮裂；

 

　　Third point:if the conveyor belt deviates,we must take measures to correct it in time to avoid scraping and cracking at the edge of the conveyor belt;

 

　　第四點：發現輸送帶局部破損時，應用人造棉及時修補，以免擴大；做到亡羊補牢。

 

　　Fourth point:in case of local damage of conveyor belt,artificial cotton shall be used to repair it in time to avoid expansion;Make up for the lost.

 

　　第五點：輸送帶接頭處要經常檢查，發現問題要及時處理。

 

　　The fifth point:the joint of the conveyor belt should be checked frequently,and the problems found should be handled in time.

 

設計結構新穎、外形美觀、技術；使用、方便、耐久性強；維修保養簡單易操作等優點。

 

       Ltd.involve various types of conveyor belts,rollers,idlers,conveyor equipment and accessories.Novel design structure,beautiful appearance and advanced technology;Safe,convenient and durable;Simple maintenance and easy operation.