同步帶在工業皮帶中應用比較廣泛，同時規格也是比較多的，各種規格參數看得我們眼花繚亂！那么如何確認同步帶的規格參數，以免造成不必要的損失呢？今天小編就分享一下確認同步帶規格的方法，希望可以幫助到大家！

Synchronous belts are widely used in industrial belts, and there are many specifications. We are dazzled by various specifications and parameters! So how to confirm the specifications of the timing belt to avoid unnecessary losses? Today, Xiaobian will share the method of confirming the specification of timing belt. I hope it can help you!

1.確認齒數（（在舊皮帶上數一下有多少個齒）

1. Confirm the number of teeth ((count the number of teeth on the old belt)

2.測量同步帶的節距（兩齒中間為節距，請測量11個齒的節距）

2. Measure the pitch of the synchronous belt (the pitch is between the two teeth, please measure the pitch of 11 teeth)

3.測量皮帶的寬度

3. Measure the width of the belt

4.測量皮帶的厚度

4. Measure the thickness of the belt

此外同步帶規格參數的不同選擇也要不同，比如：

In addition, different choices of timing belt specifications and parameters should also be different, such as:

選型時應與皮帶式齒型相匹配，即XL型皮帶配XL型同步輪。具體的皮帶長度可以在皮帶長度系列中查看。皮帶輪齒數可從說明書中選擇，其他齒數可從說明書中選擇，可以定制。

Type selection should match the belt tooth type, that is, XL belt is equipped with XL synchronous pulley. The specific belt length can be viewed in the belt length series. The number of belt teeth can be selected from the manual, and the number of other teeth can be selected from the manual, which can be customized.

這種選擇的依據是同步帶的校核主要以功率校核為主，即在考慮負載的加減速時，其所接受的負載功率不能超過平穩運行時的允許功率，并且有少量的齒輪齒。按照說明書，齒數過少，偏斜過大，會縮短使用壽命。因此，應在定位精度要求范圍內選擇較大的同步輪。

The basis for this selection is that the verification of synchronous belt is mainly based on power verification, that is, when considering the acceleration and deceleration of load, the load power it receives cannot exceed the allowable power during smooth operation, and there are a small number of gear teeth. According to the instructions, too few teeth and too large deflection will shorten the service life. Therefore, a larger synchronous wheel should be selected within the required range of positioning accuracy.

山東同步帶輪與皮帶型只需匹配齒型即可，即XL型皮帶配XL型同步帶輪。具體皮帶長度可以查看皮帶長度系列。皮帶輪的優選齒數可從手冊中選擇，其他齒數可定制。其檢查主要是功率檢查，即在考慮負載加減速時，其所接受的負載功率不能超過平穩運行時的允許功率。

Shandong synchronous belt pulley and belt type only need to match the tooth type, that is, XL belt with XL synchronous belt pulley. You can check the belt length series for specific belt length. The preferred number of teeth of the pulley can be selected from the manual, and other numbers of teeth can be customized. The inspection is mainly power inspection, that is, when considering the acceleration and deceleration of the load, the accepted load power cannot exceed the allowable power during smooth operation.

通過這篇文章，希望對您選購同步帶有所幫助，我們是一家專注多年生產同步帶的廠家。如果您有同步帶相關需求，可以直接電話聯系我們，也可以關注我們的網站http://www.ujkdbkh.cn看看相關的信息。

Through this article, I hope it can help you choose synchronous belts. We are a manufacturer specializing in producing synchronous belts for many years. If you have synchronous belt related needs, you can contact us directly by phone or follow our website http://www.ujkdbkh.cn Look at the relevant information.