Shandong flexible conveyor belt / flexible conveyor has always been a popular product in the production industry, and the help of flexible conveyor is indispensable for long production lines. Therefore, the correction of flexible conveyor sprocket has become a technical problem widely concerned in the industry, which directly affects the work efficiency and accuracy of the production line. So how to adjust the offset of flexible conveyor sprocket?

柔性輸送機鏈輪組件不平衡有四種基本類型:靜不平衡、力偶不平衡、動不平衡和準靜不平衡。當柔性輸送機鏈輪組件靜不平衡時，不平衡僅作用于柔性輸送機鏈輪組件的徑向平面，具有以下特點：

There are four basic types of unbalance of sprocket assembly of flexible conveyor: static unbalance, couple unbalance, dynamic unbalance and quasi-static unbalance. When the flexible conveyor sprocket assembly is statically unbalanced, the imbalance only acts on the radial plane of the flexible conveyor sprocket assembly, which has the following characteristics:

(1)只要柔性輸送機鏈輪組件的慣性軸相對于旋轉軸平行位移，柔性輸送機鏈輪組件就會靜態不平衡；

(1) As long as the central inertia axis of the flexible conveyor sprocket assembly displaces parallel to the rotation axis, the flexible conveyor sprocket assembly will be statically unbalanced;

(2)當柔性輸送機鏈輪組件靜不平衡時，旋轉軸與主慣性線平行；

(2) When the sprocket assembly of flexible conveyor is statically unbalanced, the rotating axis is parallel to the central main inertia line;

（3）當柔性輸送機鏈輪組件旋轉時，只有質量m產生的離心力和靜不平衡力，而不平衡力偶為零；

(3) When the sprocket assembly of flexible conveyor rotates, only the centrifugal force and static unbalanced force generated by the center of gravity mass m, and the unbalanced couple is zero;

(4)當存在靜不平衡質量mr時，柔性輸送機鏈輪組件的在靜止?fàn)顟B(tài)下相對于旋轉軸向的偏差。

(4) When there is a static unbalanced mass Mr, the deviation of the center of gravity of the flexible conveyor sprocket assembly relative to the rotating axis in the static state.

(5)當柔性輸送機鏈輪處于靜態狀態時，可以觀察到不平衡，可以在平面和不平衡反方向增加一個重物，或者在同一方向減去一個質量進行校正。

(5) When the flexible conveyor sprocket is in the static state, the imbalance can be observed. A weight can be added in the center of gravity plane and the opposite direction of the imbalance, or a mass can be subtracted in the same direction for correction.