輸送帶在皮帶輸送機中選用需要注意的以下幾個細節：
The following details should be paid attention to in the selection of conveyor belt:
皮帶輸送機在輸送物料時一般情況下需要考慮到所輸送物料的特性，如密度、比較大粒度、有無油或是化學品等;物料是否帶有著一定的腐蝕性或是酸堿性等，這些都將影響著皮帶輸送機配件輸送帶的使用壽命。還有如物料的比重、粒度大，是塊狀還 是粉未顆粒等，在對皮帶輸送機進行設，這些都是需要考慮的因素。
When conveying materials, the belt conveyor generally needs to consider the characteristics of the materials transported, such as density, relatively large particle size, whether there is oil or chemicals, etc.; whether the materials are corrosive or acid-base, etc., will affect the service life of belt conveyor accessories. There are also such as the specific gravity of materials, particle size is large, is the block or powder is not granular, etc., in the design of belt conveyor, these are the factors need to be considered.
皮帶輸送機的輸送線路布置;沿著輸送機走向頭、尾滾筒之間的距離，如皮帶輸送機根據用戶需求需要進行轉彎等情況，也需要考慮在轉彎部位輸送帶能否承受拉力，在工礦山行業，長距離固定式皮帶輸送機很多都根據需要會出現爬升、轉彎等情況，所以這 個時候還需要考慮輸送機配件輸送帶對拉力的承受能力。
The layout of conveying line of belt conveyor; Along the distance between the head and tail rollers of the conveyor, such as the situation that the belt conveyor turns according to the needs of users, it also needs to consider whether the conveyor belt at the turning position can bear the tension. In the industry and mining industry, many long-distance fixed belt conveyors will climb and turn according to the needs When also need to consider the conveyor accessories conveyor belt on the tensile capacity.
皮帶輸送機承載量是輸送能力、帶寬、帶速等。一般輸送帶所能承受的拉力是有限的，如果物料比重較大，而輸送帶不能承受 輸送設備運行時所產生的拉力，就容易將輸送帶拉斷。這時對輸送帶的選擇可以考慮選用多層帶有鋼絲繩芯的。皮帶輸送機采用輸送帶的接頭形式也關系著皮帶輸送機的運行。如現階段輸送帶接頭部分大部分都采用輸送帶兩端割平對齊，然后用螺釘上緊，也有用其他一些接頭方式
The bearing capacity of belt conveyor is conveying capacity, belt width, belt speed, etc. Generally, the tensile force that the conveyor belt can bear is limited. If the material proportion is large, and the conveyor belt can not bear the tension generated by the operation of the conveying equipment, the conveyor belt will be easily broken. At this time, the selection of conveyor belt can consider the selection of multi-layer with wire rope core. The joint form of belt conveyor is also related to the operation of belt conveyor. For example, at present, most of the conveyor belt joints are cut and aligned at both ends of the conveyor belt, and then tightened with screws, and some other joint methods are also available
About food grade conveyor belt http://www.ujkdbkh.cn First of all, I believe that you will use the relevant knowledge in the actual work, if you have the need in this respect, welcome to buy.
聯系微信
