When the conveyor belt runs away, the diffusion is caused by the height change of the two sides when the conveyor belt runs. When the other side is lower, the material scatters from the lower side. The treatment method is to adjust the deviation of conveyor belt. When the radius of curvature of concave section is small, the conveyor belt will be in suspension state.

　　由于輸送帶已離開槽輥組，一般槽角變小，使局部物料分散。為了縮短尾車，在移動式機械裝載機和堆取料機上，將此處的凹段設計為無弧過渡段。

　　Because the conveyor belt has left the groove roll group, the general groove angle becomes smaller and the local material is dispersed. In order to shorten the tail car, the concave section is designed as an arcless transition section on the mobile mechanical loader and stacker-reclaimer.

　　導槽處的鋼板設計遠離輸送帶，且橡膠裙板較長，使物料沖出導槽，注意定期保養。選購輸送帶時要準確描述具體的物料名稱、性質。特別是粒度、溫度，可有酸、堿等腐蝕性和特殊要求。指定具體的應用場合，規格寬度、長度、層數、厚度等，特別是耐熱輸送帶使用的溫度和體積。

　　The steel plate at the guide groove is designed far away from the conveyor belt, and the rubber skirt plate is longer, which makes the material rush out of the guide groove and pay attention to regular maintenance. When purchasing conveyor belts, it is necessary to accurately describe the specific material names and properties. Particularly the particle size and temperature, can have acid, alkali and other corrosiveness and special requirements. Specify specific application occasions, such as specification width, length, number of layers, thickness, etc., especially the temperature and volume of heat-resistant conveyor belt.

　　在運輸和儲存過程中，輸送帶的溫度應保持在18-40℃之間，相對濕度應保持在50-80%之間。皮帶應保持清潔，防止陽光直射或雨雪，防止與酸、堿、油等物質接觸，并離加熱裝置一米遠。

　　During transportation and storage, the temperature of conveyor belt should be kept between 18 - 40 C and the relative humidity should be kept between 50 - 80%. The Belt should be kept clean to prevent direct sunlight or rain and snow, to prevent contact with acid, alkali, oil and other substances, and one meter away from the heating device.

　　根據產品結構的不同，目前市場上輸送帶的類型可分為層狀輸送帶、全芯輸送帶、鋼絲繩芯輸送帶、鋼絲繩芯輸送帶、鋼管輸送帶、管狀輸送帶、花紋輸送帶、擋泥板輸送帶等。

　　According to the different product structure, the types of conveyor belts on the market can be divided into layered conveyor belts, full core conveyor belts, steel core conveyor belts, steel core conveyor belts, steel pipe conveyor belts, tubular conveyor belts, pattern conveyor belts, fender conveyor belts and so on.

　　無論是哪一種輸送帶，都必須連接成環形才能使用，所以輸送帶連接器的質量直接影響到輸送帶的使用壽命以及輸送帶線路能否平穩運行。一般輸送帶接頭常用的方法有機械接頭、冷接頭、熱硫化接頭。

　　No matter what kind of conveyor belt, it must be connected into a ring to use, so the quality of the conveyor belt connector directly affects the service life of the conveyor belt and whether the conveyor belt line can run smoothly. The common methods of conveyor belt joints are mechanical joints, cold joints and hot vulcanized joints.

　　其中，機械連接因其制造方便、操作快捷等優點得到了廣泛的應用。整個核心輸送帶，尤其是PVC整體核心輸送帶，95%以上的地方與機械皮帶扣連接。但是，不同的應用單元在機械扣的選擇上有一定的差異，這使得輸送帶在使用時的損壞程度和更換頻率也有很大的不同。

　　Among them, mechanical connection has been widely used because of its advantages of convenient manufacture and fast operation. The whole core conveyor belt, especially the PVC integral core conveyor belt, more than 95% of the places are connected with the mechanical belt buckle. However, different application units have some differences in the choice of mechanical buckles, which makes the damage degree and replacement frequency of conveyor belt vary greatly.

　　因此，選用性能優良的機械扣件，再加上較好的緊固工具和細致的操作，可以大限度地利用產品的性能，保證較長時間的連續工作。

　　Therefore, the selection of mechanical fasteners with excellent performance, together with better tightening tools and detailed operation, can maximize the use of product performance and ensure a longer period of continuous work.