廢舊輸送帶有什么用途
What is the purpose of waste conveyor belt
廢舊輸送帶通??捎糜诙喾N目的:
Waste conveyor belts can usually be used for a variety of purposes:
一.制作圓柱形遮陽板。由于場地的限制,電焊工作經常在露天進行。在炎熱的夏季,考慮到氧氣、乙炔暴露在陽光下會引起爆炸等不因素,修理廠根據乙炔、氧氣搬運車的外形尺寸,用廢輸送帶給搬運車戴上“大帽子”。該防曬裝置有效避免了氧氣瓶、乙炔瓶在高溫天氣下的直接暴露,了隱患。
I Make cylindrical sun visor. Due to the limitation of the site, electric welding is often carried out in the open air. In the hot summer, considering the unsafe factors such as explosion caused by exposure of oxygen and acetylene to the sun, the repair shop uses waste conveyor to bring the acetylene and oxygen carrier to wear a "big hat" according to the overall dimensions of the carrier. The sunscreen device effectively avoids the direct exposure of oxygen cylinders and acetylene cylinders in high temperature weather and eliminates potential safety hazards.

二:做成車輛擋泥皮。為減少行車期間路上砂石、泥水等物質對車輛大箱底、車輪旁邊配件、零件的損害,昌龍公司相關技術人員經過試驗、測量、比較,采用廢舊輸送帶替代鋼板制作車輛擋泥板,不僅節約了鋼板費用、保護了車輛配件、有效延長車輛大廂及油箱等配件的使用壽命,同時車輛一經安裝,使用終身,大大減少了相關維修費用。
2: Make a vehicle mud flap. In order to reduce the damage of sand, gravel, muddy water and other substances on the bottom of the vehicle trunk and the accessories and parts next to the wheels during driving, the relevant technicians of Changlong company have used waste conveyor belts to replace steel plates to make vehicle fenders through test, measurement and comparison, which not only saves the cost of steel plates, protects vehicle accessories and effectively prolongs the service life of vehicle trunk, fuel tank and other accessories, At the same time, once the vehicle is installed, it will be used for life, which greatly reduces the relevant maintenance costs.
三:做成車輛防拋灑槽。因物料在撒落過程中遇到鋼板防拋灑槽有回彈,存在無法對物料進行防拋灑的缺陷,通過對物料拋灑方向、鋼板式防拋灑槽缺陷分析,在已經安裝鋼板式防拋灑裝置的車輛上用廢舊輸送帶銜接原有防拋灑裝置與車廂邊緣,在新車上直接安裝廢舊輸送帶制作的防拋灑裝置。此裝置,能有效避免物料回彈拋灑等現象,提升了防拋灑能力。
3: Make a vehicle anti throwing trough. Due to the rebound of the steel plate anti throwing groove in the process of scattering, there is a defect that the material can not be prevented from scattering in an all-round way. Through the analysis of the material throwing direction and the defects of the steel plate anti throwing groove, the waste conveyor belt is used to connect the original anti throwing device with the edge of the carriage on the vehicle with the steel plate anti throwing device, The anti throwing device made of waste conveyor belt is directly installed on the new car. This device can effectively avoid the phenomenon of material rebound and throwing, and comprehensively improve the anti throwing ability.
四:做成建筑廢渣。用切碎機給這些廢舊的輸送帶切碎。用來鋪路基。很多公路修筑都會用到。
4: Make it into construction waste. Use a chopper to chop these waste conveyor belts. Used to pave the subgrade. Many roads are built.
五:回收再利用:把能重新放進爐子里,再次融化,做成新的輸送帶材質。
5: Recycling: put the energy back into the furnace and melt it again to make a new conveyor belt material.