Recently, I often met someone asking how to use the patch? How to make the patch stick stronger? Based on years of experience, Huafeng of Zhangqiu city briefly introduces the use method of the repair strip.

步驟1、使用修補條之前應把破損的輸送帶表面用打磨機或橡膠銼刀進行打毛處理。

Step 1. Before using the repair strip, roughen the damaged conveyor belt surface with a grinder or rubber file.

步驟2、將SC2002與固化劑UT-R40按100:4的比例混合均勻，混合后的SC2002應在2小時內使用完。

Step 2. Mix sc2002 and curing agent ut-r40 evenly in the proportion of 100:4, and the mixed sc2002 shall be used up within 2 hours.

步驟3、用毛刷將混合后的SC2002涂刷在輸送帶破損表面，先涂刷遍，完全干燥之后再進行第二遍涂刷。

Step 3. Brush the mixed sc2002 on the damaged surface of the conveyor belt with a brush, first brush it for the first time, and then brush it for the second time after it is completely dry.

步驟4、在輸送帶表面進行第二遍涂刷的同時，對修補條的CN層也進行涂刷 。

Step 4. Brush the CN layer of the repair strip while brushing the surface of the conveyor belt for the second time.

（帶CN層的修補條只需涂刷一遍混合后的SC2002）

(the repair strip with CN layer only needs to be painted with sc2002 after mixing)

步驟5、當?shù)诙楦稍锏接休p度粘性時（不粘手背），將修補條貼在需要修補的表面。

Step 5. When the second time of drying is slightly sticky (not sticky to the back of the hand), stick the repair strip on the surface to be repaired.

步驟6、粘貼修補條時注意擠出氣泡，需要用壓實滾輪從中間向外用力滾壓，然后再使用橡膠錘敲打結實。

Step 6. When pasting the repair strip, pay attention to extruding bubbles. Use the compaction roller to roll from the middle to the outside, and then use the rubber hammer to knock it firmly.

步驟7、Z后，沿著修補條的邊緣部分，用毛刷再刷一圈混合后的SC2002，將修補條邊緣覆蓋住。

After steps 7 and Z, brush another circle of mixed sc2002 with a brush along the edge of the repair strip to cover the edge of the repair strip.

步驟8、充分干燥后，2小時后可開機運行。

Step 8. After fully drying, start up and run after 2 hours.

以上是Z簡單的輸送帶修補條的使用方法，章丘市華鋒是一家于山東輸送帶修補、輸送帶接頭、的企業，我們樂于幫助單位解決輸送帶護理方面的問題。

The above is the use method of Z simple conveyor belt repair strip. Zhangqiu Huafeng is an enterprise specializing in conveyor belt repair, conveyor belt joint and in Shandong. We are willing to help the unit solve the problems of conveyor belt care.