輸送帶使用時間久了其實會出現不少的問題，就需要看程度來進行更換，更換的主要原因是磨損，那么輸送帶在運行中存在的磨損形式有幾種？一般分為以下3種。

　　If the conveyor belt is used for a long time, there will be a lot of problems. It needs to be replaced according to the degree. The main reason for replacement is wear, so how many forms of wear exist in the conveyor belt in operation? Generally divided into the following three.

　　輸送帶硫化接頭處磨損通常是由于輸送帶自身材料要比硫化接頭處膠層的耐磨度高或熱硫化質量問題，造成硫化接頭膠層局部磨損，露出鋼絲芯或尼龍芯，對輸送帶之間的硫化接頭強度構成嚴重威脅。

　　The wear of the conveyor belt vulcanized joint is usually due to the high wear resistance of the conveyor belt's own material than the rubber layer of the vulcanized joint or the quality problem of hot vulcanization, resulting in local wear of the rubber layer of the vulcanized joint, exposing the steel wire core or nylon core, posing a serious threat to the strength of the vulcanized joint between the conveyor belt.

　　輸送帶在裙板部位磨損，由于輸送帶導料裝置的裙板調整不當或者導料裙板設計不良，會導致裙板在運行中磨損輸送帶，造成輸送帶兩側上膠層磨損嚴重，整條膠帶縱向運行方向露出鋼繩芯或尼龍芯，一旦聚酯翹起，極易纏繞到托輥上，造成鋼絲帶脫絲或膠帶的撕裂。

　　Conveyor belt parts wear the skirt board, because of improper adjustment apron conveyor belt feed device or feed apron poorly designed, can lead to wear in the operation of the apron in conveyor belt, causing a rubber conveyor belt on both sides of the serious wear and tear, and the whole belt longitudinal direction with steel rope or the godson, once the cock of polyester, winding on the roller extremely easily, cause steel wire or tape torn off.

　　山東輸送帶中間部位磨損這是由落料沖擊造成的，由于漏斗的落料點相對固定，因此輸送帶承受沖擊的部位磨損加劇，造成輸送帶沿運行方向局部磨損嚴重，也會導致露出的鋼繩芯脫絲或輸送帶撕裂。

　　Shandong conveyor belt wear in the middle part of this is caused by the impact of falling material, due to the hopper falling point is relatively fixed, so the impact of the conveyor belt wear, causing serious local wear along the direction of the conveyor belt, will also lead to exposed steel rope core off wire or conveyor belt tear.

　　對于尼龍橡膠帶則造成中間部位強度下降，由于承載托輥存在3?！?。的前傾角，所以在承載托輥趨中力的作用下，膠帶運行中會出現“疊帶”的危險現象。

　　For nylon rubber belt, the strength of the middle part decreases, because the bearing roller exists 3. ~ 4. So under the action of the centralizing force of the bearing roller, there will be a dangerous phenomenon of “overlapping belt” in the operation of the belt.

　　所以在選擇輸送帶的時候我們就要注意到它的材質以及后期的施工工藝，從而能夠更好的保證我們所選購的產品在耐用性上是具有更多的優勢的。更多內容了解就來網站www.ujkdbkh.cn吧。

　　So when choosing the conveyor belt, we should pay attention to its material and later construction technology, so as to better ensure that the products we choose and buy have more advantages in durability. For more information, visit www.ujkdbkh.cn.