We know that the wire rope conveyor belt should be overhauled frequently in daily work, but why should we do so? This is because once the belt is damaged, if we do not find it in time, it is easy to cause the following adverse consequences:

皮帶強度變小。一旦皮帶發生破損，損壞的程度就會越來越快，尤其是破損部位達到內部骨架層時，會嚴重影響輸送皮帶的使用強度，耐用性降低。皮帶損傷內部骨架層時就容易進水造成銹蝕，大大降低皮帶的耐用程度。低強度輸送皮帶在運轉過程中，如果遇到超負荷運轉的情況時，如常見的帯料啟動或者皮帶卡主的情況，就很容易發生斷裂。

The belt strength decreases. Once the belt is damaged, the degree of damage will be faster and faster, especially when the damaged part reaches the internal skeleton layer, which will seriously affect the service strength and durability of the conveyor belt. When the belt is damaged to the internal skeleton layer, it is easy to get water and cause corrosion, which greatly reduces the durability of the belt. During the operation of low-strength conveyor belt, it is easy to break in case of overload operation, such as common belt material startup or belt jamming.

2.鋼絲繩輸送帶發生跑偏事故。如果輸送皮帶兩側的損傷程度不同的情況下，會導致兩側皮帶的拉伸率不同，進而影響皮帶兩側的速度不同，更終導致皮帶發生跑偏，這時如果強行糾正會導致皮帶破損更加嚴重。

2. Deviation accident of steel wire rope conveyor belt. If the degree of damage on both sides of the conveyor belt is different, it will lead to different stretching rates of the belts on both sides, which will affect the different speeds on both sides of the belt, and eventually lead to belt deviation. At this time, if forcibly corrected, it will lead to more serious belt damage.

3.皮帶厚度減小，皮帶表面發生損傷，會使皮帶厚度降低，在皮帶交接處，如果兩者的厚度不一致的話，就容易在運行中發生刮碰摩擦，對托輥和接頭都有極大的磨損和傷害，尤其是新舊皮帶交接處。使用硫化連接法進行連接的皮帶，更容易因為厚度的差異造成連接工藝上的困難。

3. If the thickness of the belt is reduced and the surface of the belt is damaged, the thickness of the belt will be reduced. At the junction of the belt, if the thickness of the two is inconsistent, it is easy to have scratch friction during operation, which will cause great wear and damage to the idler and joint, especially at the junction of the old and new belts. For the belt connected by vulcanization connection method, it is easier to cause difficulties in connection process due to the difference of thickness.

以上就是山東傳送帶廠家今天講的關于鋼絲繩輸送帶檢修方面相關的知識，了解掌握這些知識，能夠很好地幫助用戶在使用過程中增加收益，減少不利因素。

The above is the relevant knowledge about the maintenance of steel wire rope conveyor belt that Shandong conveyor belt manufacturer talked about today. Understanding and mastering these knowledge can well help users increase income and reduce adverse factors in the process of use.