We know that in the production process of the conveyor belt, the rubber belt surface is caused by the drop of the friction big angle and the materials, and the big angle heat-resistant conveyor belt is more prone to this situation. Because the transportation and high-temperature materials are easy to peel off due to the impact of high temperature, when all this happens, the life of the conveyor belt will be greatly reduced. We will explain the causes and solutions of skin desquamation.

　　，我們會了解輸送帶剝落的原因。,帶后增塑的,骯臟的材料附著在傳送帶上時,通過改變輥,這將使傳送帶上剝離。第二,傳送帶的增塑劑降水,使傳送帶層之間的附著力和強度大大降低,導致剝落。

　　First of all, we will understand the causes of belt peeling. First, when plasticized, dirty material is attached to the belt, it will peel off the belt by changing the roller. Second, the plasticizer precipitation of the conveyor belt greatly reduces the adhesion and strength between the conveyor belt layers, resulting in peeling off.

　　那么如何解決大傾角輸送帶的表面剝離問題呢?

　　So how to solve the problem of the surface peeling off of the high angle conveyor belt?

　　，我們需要檢查適合輸送帶的物料和合適的生產環(huán)境。如果不選擇合適的輸送帶，大傾角輸送帶的壽命會大大降低。其次，操作人員必須進行相應的輸送帶運維操作的知識培訓，必須對設備進行相應的檢查，發(fā)現(xiàn)故障問題必須及時處理，防止發(fā)生更嚴重的事故。第三，大傾角的輸送帶模型應與輸送裝置匹配，不匹配的輸送帶將導致輸送帶損壞。

　　First of all, we need to check the materials suitable for the conveyor belt and the suitable production environment. If the right conveyor belt is not selected, the life of the high angle conveyor belt will be greatly reduced. Secondly, the operators must carry out the corresponding professional knowledge training of conveyor belt operation and maintenance operation, and must carry out the corresponding inspection of the equipment. If any fault is found, it must be dealt with in time to prevent more serious accidents. Third, the belt model with large inclination angle should match with the conveyor, and the mismatched conveyor will cause the conveyor belt damage.

　　以上是造成大傾角輸送帶損壞的主要原因。只有采取適當?shù)拇胧?，才能防止皮帶的非正常磨損。

　　The above is the main reason for the damage of high angle conveyor belt. Only by taking proper measures can the abnormal wear of the belt be prevented.