留意在保送帶啟動之前,應該按請求認真檢查。切忌將不同種類、型號、規格的保送帶銜接在一同運用;
Note that before the start of the delivery belt, it should be carefully checked as requested. Do not use different types, models and specifications of delivery belts together.
發現保送帶部分破損時,應用人造棉及時修補,以免擴展;
When it is found that part of the delivery belt is damaged, artificial cotton should be used to repair it in time so as to avoid expansion.
防止托輥被物料掩蓋,形成回轉不靈,避免漏料卡于滾筒與膠帶之間,留意保送帶活動局部的光滑,但不得油污保送帶;
Prevent the roller from being covered by the material, form a failure of rotation, avoid leakage stuck between the drum and the tape, pay attention to the smooth movement of the belt, but not oil-stained belt;
避免保送帶負荷啟動;
Avoid start-up of escort with load;
調理好打掃安裝及刮板、防止磨損保送帶,防止油類或油脂類等雜物粘結在保送帶及托輥或輥筒上,盡可能防止雨雪或陽光形成保送帶老化;
Clean and install the scraper, prevent wear and tear of the belts, prevent oil or grease and other sundries from sticking to the belts and rollers or rollers, as far as possible prevent rain, snow or sunshine from forming the aging belts;
保送帶發作跑偏,應及時采取措施糾正;
If the belts run off, measures should be taken to correct them in time.
防止保送帶遭受機架,支柱或塊狀物料的阻滯,避免碰破扯裂;
Prevent the delivery belt from being blocked by rack, pillar or block material, and avoid breaking and tearing.
保送帶在運轉過程中,張力不要超越保送帶設計的張力,并防止超載;
During the operation of the belt, the tension should not exceed the tension of the belt design and prevent overloading.
防止在保送帶四周運用氣割機或電焊機以防損及保送帶,保送帶有損壞時應及時修理;
Avoid using gas cutter or electric welding machine around the delivery belt to prevent damage to the delivery belt. When the delivery belt is damaged, it should be repaired in time.
在給料方向須同保送帶運轉方向分歧,給料要平均,防止部分負載過大,要盡量減少物料的落差。
The feeding direction should be different from the running direction of the delivery belt, and the feeding should be average to prevent part of the load from being too large and to minimize the material drop.
This article is dedicated by the great inclination conveyor belt friendship. For more knowledge, please click: http://www.ujkdbkh.cn. We will use advanced technology and sincere attitude to provide you with comprehensive services. More relevant knowledge will be dedicated to you one after another. Please look forward to it.