工業皮帶顧名思義就是運用在工業上的皮帶，工業皮帶有工業傳動帶、汽車傳動帶和輸送帶三大類。工業傳動帶和汽車傳動帶是屬于傳動帶，用于傳遞機械動力的膠帶主要有橡膠和增強材料（如棉帆布、人造絲、合成纖維或鋼絲等）構成。與齒輪傳動、鏈條傳動相比，膠帶傳動具有機構簡單、噪聲小和設備成本低等優點，普遍用于各種的動力傳動。機器上傳動的環形帶，套在兩個皮帶輪上，多用牛皮或線蕊橡膠制成，通稱工業皮帶。
Industrial belt, as the name suggests, is the belt used in industry. There are three types of industrial belt, automobile belt and conveyor belt. Industrial transmission belt and automobile transmission belt belong to transmission belt. Rubber and reinforced materials (such as cotton canvas, rayon, synthetic fiber or steel wire) are used to transmit mechanical power. Compared with gear transmission and chain transmission, belt transmission has the advantages of simple mechanism, low noise and low equipment cost, which is widely used in various power transmission. The ring-shaped belt on the transmission of the machine is sheathed on two pulleys. It is mostly made of cow hide or thread core rubber, which is commonly known as industrial belt.
工業皮帶相關儲存事項：
Storage of industrial belts:
1. 皮帶和帶輪應保持干凈 不得沾有油和水。
1. The belt and pulley shall be kept clean and free from oil and water.
2. 皮帶安裝時，應檢查傳動系統，傳動軸與傳動輪是否垂直，傳動軸之間是否平行，傳動輪是否在一個平面上，如果不是，應當校正。
2. When installing the belt, check whether the transmission system, the transmission shaft and the transmission wheel are vertical, whether the transmission shafts are parallel, and whether the transmission wheel is in a plane. If not, correct it.
3. 請勿粘染油脂或其他化學品于皮帶上。
3. Do not stick grease or other chemicals on the belt.
4. 工業皮帶安裝時工具或外力切勿直接施力于皮帶上。
4. During the installation of industrial belt, tools or external forces should not be applied directly on the belt.
5. 皮帶的使用溫度范圍為:-40°-120°C 。
5. The temperature range of the belt is - 40 ℃ °- one hundred and twenty ° C 。
6. 儲存期間應避免使皮帶承受過大的重量而變形，防止機械損傷，不得過于彎曲和擠壓。
6. During storage, the belt shall not be deformed due to excessive weight, and mechanical damage shall be prevented. It shall not be too bent or squeezed.
7. 工業皮帶在儲存和運輸期間，應避免陽光直射或是雨雪浸淋，保持清潔，防止與酸堿油類及有機溶劑等影響橡膠質量的物質接觸。
7. During storage and transportation, the industrial belt shall be kept clean from direct sunlight or rain and snow, and shall not be in contact with acid, alkali, oil, organic solvent and other substances that affect the rubber quality.
8. 貯存時庫房溫度宜保持在-15~40攝氏度之間 相對濕度宜保持在50%~80%之間。
8. During storage, the warehouse temperature should be kept between - 15 ~ 40 ℃, and the relative humidity should be kept between 50% ~ 80%.
由于每個工業皮帶的性能以及材料有所差別，因此在儲存方式上，每種工業皮帶還是有一些不同，但是萬變不離其宗，希望對用戶有一定幫助。
Because the performance and material of each brand of industrial belt are different, so in the storage mode, each kind of industrial belt still has some differences, but the change is inseparable from its origin. I hope it will be helpful to users.
The highlights of this article are shared by Shandong conveyor belt manufacturers. For more highlights, please click our website: http://www.ujkdbkh.cn , we will have more wonderful content waiting for you to check, welcome to inquire
聯系微信
