1. Choose the belt with the same type as your own machine and can match the tooth saw.

2、輸送帶廠家主張，在花紋PVC輸送帶輪上設備新的皮帶，不能用工具直接撬跟吸濕皮帶。

2. Conveyor belt manufacturers advocate that new belts should be installed on patterned PVC conveyor pulley instead of directly prying the belt with tools.

3、拆開包裝查看皮帶概括是不是有裂縫，發現有裂縫則為廢品。

3. Open the package to check whether there are cracks on the belt. If cracks are found, they are waste products.

4、調緊機械設備的基地距，運用張力測量?jī)x測驗皮帶張力的細。

4. Adjust the base distance of mechanical equipment and test the belt tension with tension measuring instrument.

5、查看別的的機械裝備，看是不是跟皮帶相對稱及油脂是不是增加的。

5. Check other mechanical equipment to see if it is proportional to the belt and if the grease is increased.

6、要擰緊機械的安裝螺栓，方正扭矩。由于機械設備在運作時基地距的改變都會導致皮帶及配件的功用不運用。

6. To tighten the mounting bolts of the machine, square the torque. Due to the change of base distance in the operation of mechanical equipment, the function of belt and accessories will not be used.

7、假如摸上去覺得太熱，可能是花紋PVC輸送帶太過于緊，或是軸承不對稱，或光滑不正確。

7. If feel too hot, may be pattern PVC conveyor belt too tight, or bearing asymmetry, or smooth incorrect.

花紋PVC輸送帶輪在運用過程中需求長時間保持其完好的結構，所以它能夠一向正常工作。在保持其完好結構方面，產品本身需求具有杰出的強度，以使其不簡單被外部損壞，從而實現長時間運用。

Pattern PVC conveyor pulley needs to keep its intact structure for a long time in the process of application, so it can always work normally. In terms of maintaining its good structure, the product itself needs outstanding strength, so that it is not simply damaged by the outside, so as to achieve long-term use.

挑選正時皮帶時，應該首要考慮機械適應性。凸粒狀斑紋適用于軟包裝物或需有抓著力的物料輸送或無滑動輸送。帶面上有高出帶體或凹嵌入帶體的粒狀斑紋，也可將凹坑制成方孔形或棱形和布紋形。

When selecting timing belt, the first consideration should be mechanical adaptability. It is suitable for conveying soft packing materials or materials that need to be grasped or without sliding. On the surface of the belt, there are granular speckles which are higher than the belt body or concave embedded in the belt body, and the pits can also be made into square hole shape, prismatic shape and cloth pattern shape.

同步帶輪選用多頭滾刀，在大進給且條件下，受到插齒機刀具往復運動機構的約束。近在開發選用刀具卸載，運用靜承，增強刀架與立柱剛性等新結構后，功率有明顯提高。

The synchronous belt pulley is a multi head hob, which is constrained by the reciprocating mechanism of the cutter of gear shaper under the condition of large feed. In recent years, after the development of new structures such as tool unloading, hydrostatic bearing and strengthening the rigidity of tool holder and column, the power has been significantly improved.