1. Joint method: The way to deliver the joints with the belt is: mechanical joints, cold bonded joints, hot vulcanized joints number several commonly used methods. Mechanical joints generally refer to the use of belt buckle joints, which are convenient and economical, but the efficiency of the joints is low and easy to damage, which has a certain impact on the service life of the belts. In the joints of PVC and PVG whole core flame retardant and antistatic belts, the common products below grade 8 belts adopt this joint method.

2、冷粘接頭：即采用冷粘粘合劑來停止接頭。這種接頭方法比機械接頭的效率高，也比擬經濟，應該可以有比擬好的接頭效果，但是從理論來看，由于工藝條件比擬難控制，另外粘合劑的質量對接頭的影響十分大，所以不是很穩定。 熱硫化接頭，理論證明是理想的一種接頭辦法，可以保證高的接頭效率，同時也十分穩定，接頭壽命也很長，容易控制。但是存在工藝費事、費用高、接頭時間長等缺陷。

2. Cold-bonded joint: that is, cold-bonded adhesive is used to stop the joint. This kind of joint method is more efficient and economical than mechanical joint. It should have better joint effect. But theoretically, it is not very stable because the process conditions are difficult to control and the quality of adhesives has a great influence on the joint. Thermally vulcanized joints have been proved to be the most ideal joint method, which can ensure high joint efficiency, stability, long service life and easy to control. However, there are some defects, such as technics trouble, high cost and long joint time.

3、分層保送帶的接頭： 能夠依據需求采用機械接頭、冷粘接頭、熱硫化接頭號接頭辦法。普通冷粘接頭、熱硫化接頭采取的是階梯式構造接頭。

3. Joints with layered delivery belts: Mechanical joints, cold bonded joints and hot vulcanized joints can be adopted according to the requirements. The common cold-bonded and hot-vulcanized joints adopt stepped joints.

4、PVC和PVG整芯阻燃保送帶的接頭： 由于整芯帶的構造比擬特殊，接頭不太容易，所以大多數采用機械接頭方法，即皮帶扣接頭。但是8級以上的保送帶，為了保證接頭效果，普通還是采用熱硫化接頭的辦法。接頭的構造都是指狀接頭。PVC和PVG整芯阻燃保送帶的熱硫化接頭工藝比擬復雜，對設備的請求也比擬高。

4. Joints of PVC and PVG Whole-core flame-retardant belts: Because of the special structure of the Whole-core belts, the joints are not easy, so most of them adopt mechanical joints, i.e. belt buckle joints. However, in order to ensure the effect of the joint, the hot vulcanized joint is usually used in the delivery belt above grade 8. The joints are all finger joints. The process of hot vulcanized joints of PVC and PVG whole core flame retardant belts is comparatively complex, and the requirements for equipment are also comparatively high.