1.初張力太?。狠斔蛶щx開滾筒處的張力不夠造成輸送帶打滑；這種情況一般發生在啟動時，解決的辦法是調整拉緊裝置，加大初張力；
1. The initial tension is too small: the tension at the place where the conveyor belt leaves the drum is not enough, which causes the conveyor belt to slip; this kind of situation generally occurs when starting, and the solution is to adjust the tension device and increase the initial tension;
2.傳動滾筒與輸送帶之間的摩擦力不夠造成打滑，其主要原因多半是輸送帶上有水或環境潮濕，解決辦法是在滾筒上加些松香末，但要注意不要用手投加，而應用鼓風設備吹入，以免發生人身事故；
2. The friction between the driving roller and the conveyor belt is not enough, which causes the slip. The main reason is that there is water on the conveyor belt or the environment is humid. The solution is to add some rosin powder on the roller, but pay attention not to add it by hand, but to use the blower equipment to blow in, so as to avoid personal accidents;
3.尾部滾筒軸承損壞不轉或上下托輥軸承損壞不轉的太多，造成損壞的原因是機尾浮沉太多，沒有及時檢修和更換已經損壞或轉動不靈活的部件，使阻力增大造成打滑；
3. The tail roller bearing is damaged and does not rotate or the upper and lower idler bearings are damaged and does not rotate too much. The reason for the damage is that there are too many floats and sinks at the tail, and the damaged or inflexible rotating parts are not repaired and replaced in time, which increases the resistance and causes slipping;
4.啟動速度太快也能形成打滑，此時可慢速啟動。如使用鼠籠電機，可點動兩次后再啟動，也能有效克服打滑現象；
4. If the starting speed is too fast, it can also cause slippage. At this time, it can start slowly. If the squirrel cage motor is used, it can be inched twice and then started, which can also effectively overcome the slip phenomenon;
5.輸送帶的負荷過大，超過電機能力也會打滑，此時打滑有利的一面是對電機起到了保護作用。否則時間長了電機將被燒毀。但對于運行來說則是打滑事故。
5. If the load of the conveyor belt is too large, it will slip even if it exceeds the capacity of the motor. At this time, the favorable side of the slip is that it has a protective effect on the motor. Otherwise, the motor will be burned after a long time. But for the operation, it is a slip accident.
The above is Shandong conveyor belt wholesale http://www.ujkdbkh.cn Thank you for checking our company's information in your busy schedule. If you want to know more, you are welcome to inquire!
聯系微信
