工業皮帶有工業傳動帶、汽車傳動帶和保送帶三大類。前兩種都屬于傳動帶。傳動帶用于傳送機械動力的膠帶，包括平型傳動膠帶和三角傳動膠帶（V型膠帶）。由橡膠和加強資料（如棉帆布、人造絲、合成纖維或鋼絲等）構成。以多層掛膠帆布、合成纖維織物、簾線和鋼絲等作抗拉層，覆合橡膠后經成型、硫化而制成。與齒輪傳動、鏈條傳動相比，膠帶傳動具有機構簡單、噪聲小和設備本錢低等優點，普遍用于各種的動力傳動。機器上傳動的環形帶，套在兩個皮帶輪上，多用牛皮或線蕊橡膠制成，通稱皮帶。
Industrial belt includes industrial belt, automobile belt and conveyor belt. The first two belong to the transmission belt. The belt is used for conveying mechanical power, including flat belt and triangular belt (V belt). It consists of rubber and reinforcement materials such as cotton canvas, rayon, synthetic fibers or steel wires. The multi-layer hanging rubber canvas, synthetic fibre fabric, cord and steel wire are used as the tensile layer. After laminating rubber, they are formed and vulcanized. Compared with gear transmission and chain transmission, belt transmission has the advantages of simple mechanism, low noise and low equipment cost, and is widely used in various power transmission. Ring belt driven on the machine, sleeved on two pulleys, is made of cowhide or thread rubber, commonly known as belt.
工業皮帶的貯存
Storage of industrial belts
1、儲存時庫房溫度宜堅持在-15~40攝氏度之間相對濕度宜堅持在50%~80%之間。
1. Storage temperature should be between - 15 and 40 degrees Celsius and relative humidity should be between 50% and 80%.
2、在貯存和運輸期間，應防止陽光直射或雨雪浸淋，堅持清潔，避免與酸堿油類及有機溶劑等影響橡膠質量的物質接觸。
2. During storage and transportation, direct sunshine or rain and snow should be prevented, cleanliness should be maintained, and contact with substances such as acid-base oils and organic solvents that affect rubber quality should be avoided.
3、貯存期間應防止使皮帶接受過大的重量而變形，避免機械損傷，不得過于彎曲和擠壓。
3. During storage, the belt should be prevented from deforming due to accepting large weight, avoiding mechanical damage, and should not be too bent or extruded.
工業皮帶的運用常識
Common sense of industrial belt application
1、皮帶的運用溫度范圍為:-40°-120°C。
1. The temperature range of belt is - 40 120 C.
2、請勿粘染油脂或其他化學品于皮帶上。
2. Do not stick grease or other chemicals to the belt.
3、皮帶裝置時工具或外力切勿直接施力于皮帶上。
3. Do not apply the tool or external force directly to the belt when the belt is installed.
4、皮帶和帶輪應堅持干凈，不得沾有油和水。
4. Belts and pulleys should be kept clean and not contaminated with oil and water.
皮帶裝置時，應檢查傳動系統，傳動輪和傳動軸能否垂直，傳動軸能否平行，傳動輪能否在同一平面，發現問題，及時校正。
When the belt device is used, the transmission system, whether the transmission wheel and the transmission shaft are vertical, whether the transmission shaft is parallel, whether the transmission wheel is on the same plane, whether the problem is found, and corrected in time should be checked first.
聯系微信
