1、冷粘接頭。即采用冷粘粘合劑來停止接頭。
1. Cold bonded joints. That is to say, cold adhesive is used to stop the joint.
優點：這種接頭方法比機械接頭的效率高，也比擬經濟，應該能夠有比擬好的接頭效果，但是從理論來看
Advantages: This kind of joint method is more efficient and economical than mechanical joint. It should be able to have better joint effect, but from the theoretical point of view.
缺陷：由于工藝條件比擬難控制(熟知并能運用) ，另外粘合劑的質量對接頭的影響十分大，所以不是很穩定（解釋:穩定安定；沒有變動)。用冷粘膠粘接相當于保送帶本身強度的40%-55%。
Defects: Because the process conditions are difficult to control (familiar and applicable), and the quality of adhesives has a great impact on the joint, so it is not very stable (Interpretation: stable; no change). Adhesion with cold adhesive is equivalent to 40%-55% of the strength of the belt itself.
2、機械接頭。橡膠保送帶有耐熱帶、耐磨帶、耐灼燒帶、耐油帶、耐堿帶、耐堿帶、耐熱帶、耐寒帶等特性。 主要用于各礦山、冶金、鋼鐵、煤炭、水電、建材、化工、糧食等企業的固體物料保送。
2. Mechanical joint. Rubber delivery belt has the characteristics of tropical, wear-resistant, burning-resistant, oil-resistant, alkali-resistant, alkali-resistant, tropical and cold-resistant. Mainly used for solid material delivery in mining, metallurgy, iron and steel, coal, hydropower, building materials, chemical industry, grain and other enterprises.
優點：普通是指運用皮帶扣接頭，這種接頭辦法便當便利，也比擬經濟，聚氯乙烯和PVG整芯阻燃抗靜電（是一種處于靜止?fàn)顟B(tài)的電荷）保送帶接頭中，普通8級帶以下的產品都采用這種接頭辦法。
Advantages: Usually refers to the use of belt buckle joints, which are convenient and economical. In the PVC and PVG whole core flame retardant and antistatic (a static charge) belt joints, the common products below 8 bands all use this kind of joint method.
不好的：但是接頭的效率低，容易損壞，對保送帶產品的運用壽命有一定影響。用卡扣銜接相當于保送帶本身強度的28%-45%。
Poor center: But the efficiency of the joint is low and easy to damage, which has a certain impact on the service life of the belt products. The strength of the belt itself is 28% - 45% by using the card buckle.
3、熱硫化接頭。
3. Thermal vulcanized joints.
優點：理論證明是理想的一種接頭辦法，能夠保證高的接頭效率，同時也十分穩定（解釋:穩定安定；沒有變動)，接頭壽命也很長，容易控制(熟知并能運用) 。保送帶廠家是帶式保送機的主要部件，主要用于煤炭、礦山、冶金、化工、建筑和交通等部門的大范圍連續化運輸，運輸?shù)奈锪戏譃閴K狀、粉狀、糊狀和成件物品等。從微觀構成來看，保送帶主要由骨架資料、掩蓋層及打底資料三大局部組成，其中掩蓋層為決議其性能及用處的關鍵局部。
Advantages: The theory proves to be the most ideal joint method, which can ensure high joint efficiency, but also very stable (explanation: stable stability; no change), long service life of the joint, easy to control (well-known and can be used). Belt manufacturer is the main component of belt conveyor. It is mainly used for large-scale continuous transportation of coal, mining, metallurgy, chemical industry, construction and transportation departments. The materials transported are divided into block, powder, paste and parts. From the microscopic point of view, the delivery belt mainly consists of three parts: skeleton data, cover layer and bottom-up data. The cover layer is the key part to determine its performance and use.
不好的：但是存在工藝費事、費用高、接頭時間長等缺陷。用機械熱硫化粘結相當于保送帶本身強度的60%-80%。
Poor center: But there are some defects, such as technics trouble, high cost, long connection time and so on. The mechanical thermal vulcanization bonding is equivalent to 60%-80% of the strength of the belt itself.
This article is written by the steep inclined conveyor belt. For more products and more details, please pay attention to our official website: http://www.ujkdbkh.cn.
聯系微信
