輸送帶正式裝配使用后經常出現故障是一件讓人非?？鄲赖氖虑?，大多數情況下輸送帶出現故障問題多數是由于輸送帶本身的質量原因，但是也不排除的由于使用方法不當導致的，一般我們常見的輸送帶故障有跑偏和撕裂這兩種，我們應該怎么做才能夠減少輸送帶故障的情況呢？
It is a very distressing thing that the conveyor belt often breaks down after formal assembly and use. In most cases, the conveyor belt breaks down mostly due to the quality of the conveyor belt itself, but it cannot be ruled out that it is caused by improper use methods. Generally, there are two common conveyor belt faults: deviation and tearing. What should we do to reduce the conveyor belt faults?
1、設計制作防跑偏托輥裝置
1. Design and manufacture of anti deviation idler device
輸送帶跑偏是造成輸送帶刷邊的主要原因。因此，在原有機架的基礎上，每10個機架裝2個防偏裝置，使輸送帶的偏差自動修正。該方法簡單易行，防跑偏效果好。
Belt deviation is the main cause of belt edge brushing. Therefore, on the basis of the original frame, 2 anti deviation devices are installed for every 10 frames to automatically correct the deviation of the conveyor belt. The method is simple and easy to operate, and the effect of preventing deviation is good.
2、修改惰輪的原始形狀
2. Modify the original shape of the idler gear
現在所使用的托輥全部都是端面和托輥表面成直角形，鋒利的直角邊緣在托輥轉動不靈活時，由于輸送帶上的貨物，輸送帶承受向下的彎曲力，托輥邊緣像刀一樣嵌入輸送帶，輸送帶縱向撕裂。設計圓弧型托輥能夠從根本上解決這一問題，取代原有的傳統工藝。即使輸送帶在兩組滾筒之間由于較大的負載而彎曲，也不會損壞輸送帶，從根本上解決輸送帶的縱向撕裂問題。
At present, all the idlers used are in a right angle shape between the end face and the surface of the idlers. When the sharp right angle edge is inflexible in the rotation of the idlers, the conveyor belt bears a downward bending force due to the goods on the conveyor belt. The edge of the idlers is embedded into the conveyor belt like a knife, and the conveyor belt is torn longitudinally. The design of circular arc idler can fundamentally solve this problem and replace the original traditional process. Even if the conveyor belt is bent between two groups of rollers due to large load, it will not damage the conveyor belt and fundamentally solve the longitudinal tearing problem of the conveyor belt.
切菜機輸送帶是輸送設備輸送物料的重要載體，我們要重視輸送帶的使用和維護，挑選適合自己實際使用情況的輸送帶產品，在遇到輸送帶經常性發生損壞的情況時，也可以根據以上提及的兩種方法進行調整，確保輸送帶的使用能夠?yàn)槲覀儙砝硐氲男Ч?/div>
The conveyor belt of the vegetable cutting machine is an important carrier for conveying materials by the conveying equipment. We should pay attention to the use and maintenance of the conveyor belt, and select the conveyor belt products suitable for our actual use. In case of frequent damage to the conveyor belt, we can also adjust it according to the two methods mentioned above to ensure that the use of the conveyor belt can bring us ideal results.
The above is the relevant answers to the questions. If you want to get more relevant information, please follow our website http://www.ujkdbkh.cn Come on!
聯系微信
