1. Feeding direction should be different from belt running direction. In order to reduce the impact of blanking on the belt, chute is used to reduce the blanking distance; In the receiving section of the belt, the distance between rollers should be shortened and the buffer roller should be used for material leakage. The belt should use a soft and moderate baffle to prevent the baffle from being too large and scratching the belt surface.

2、不同型號、規格的白色食品級輸送帶不應在一同運用，其接頭應該采用膠接法。

2. Different models and specifications of white food grade conveyor belt should not be used together, its joint should be glued.

3、輸送帶的運轉速度不應超越2.5m/s，結塊度大、磨損大、采用固定梨卸料的物料應盡量低速裝置。

3. The running speed of the conveyor belt should not exceed 2.5m/s, and the materials with large caking degree, large wear and fixed pear discharge should be equipped with low speed device as far as possible.

4、食品級輸送帶在運用中應留意以下事項：

4. Food grade conveyor belt should pay attention to the following items in use:

(1)為避免托輥被物料遮蓋，形成轉動不靈敏，防止漏料卡在滾筒與膠帶之間，留意部分活動平穩，但不得油污輸送帶;

(1) In order to avoid the idlers being covered by the materials, the rotation is not sensitive, and the material leakage is prevented from being stuck between the roller and the belt. Pay attention to the smooth movement of some parts, but the belt should not be contaminated;

(2)避免帶負荷起動;

(2) Avoid starting with load;

(3)皮帶起跳跑偏，采取措施糾正;

(3) Belt take-off deviation, take measures to correct;

(4)發現膠帶部分破損，應該用人工棉及時修補，以免擴展;

(4) If the tape is damaged, it should be repaired with artificial cotton in time to avoid expansion;

5、保送機驅動滾筒直徑與輸送帶布層的關系、驅動滾筒的匹配、改換滾筒與滾筒槽角的請求等，應依據運輸車的設計規則合理選擇。

5. The relationship between the diameter of the driving roller and the cloth layer of the conveyor belt, the matching of the driving roller and the request of changing the groove angle between the roller and the roller should be reasonably selected according to the design rules of the transport vehicle.

6、依據應用條件，合理選擇輸送帶的類型、構造、規格和層數。

6. According to the application conditions, the type, structure, specification and layer number of conveyor belt should be reasonably selected.