一般來說輸送帶和托輥之間產生不正常摩擦的原因有以下幾個原因：
Generally speaking, there are several reasons for abnormal friction between conveyor belt and idler
種可能是調心托輥糾偏發生了磨損，這種情況會導致托輥發生一定的傾斜，繼而會導致回轉架旋轉轉動不再不靈活，如果旋轉不能及時復位，就會導致皮帶和托輥嚴重摩擦。
The first possibility is that the alignment idler is worn, which will lead to a certain tilt of the idler, and then the rotation of the turret is no longer inflexible. If the rotation can not be reset in time, it will lead to serious friction between the belt and the idler.
第二種情況是托輥打滑，有時候托輥因為質量等問題，發生打滑的情況，會導致托輥與輸送帶之間因為相對滑動而產生磨損。
The second situation is the roller slipping, sometimes the roller due to quality problems, the occurrence of slipping, will lead to roller and conveyor belt due to relative sliding and wear.
第三種情況是未能正確安裝托輥架;由于托輥安裝不正確，會讓托輥軸線不垂直于輸送帶線，這樣會導致皮帶與托輥之間打滑，產生磨損。
The third case is that the idler frame is not installed correctly; Due to the incorrect installation of the idler, the axis of the idler will not be perpendicular to the center line of the conveyor belt, which will lead to the slip between the belt and the idler, resulting in wear.
既然我們知道了原因，就須針對性的解決這些問題，保持托輥軸線垂直于輸送帶線;其次是兩側傾斜托輥與中間水平托輥具有相同的傾斜角度，所有中間托輥在同一水平面上，使所有托輥與輸送帶有良好的接觸，保證各個托輥受力均勻。第三、制定嚴格的托輥保養維護制度，托輥發生破損要及時更換。
Now that we know the reason, we must solve these problems. First, keep the roller axis perpendicular to the conveyor belt center line; Secondly, the inclined idlers on both sides have the same inclination angle with the intermediate horizontal idlers, and all the intermediate idlers are on the same horizontal plane, so that all the idlers have good contact with the conveyor belt, and the force on each idler is uniform. Third, the development of strict roller maintenance system, roller damage to replace in time.
輸送帶磨損雖然很常見，但是如果不能很好的解決這個問題，可能會導致更嚴重的問題發生，因而廣大用戶須重視這個問題，還了通過以上白色輸送帶廠家的分析相信大家應該也都明白了把，還有什么問題也歡迎咨詢我們。
Conveyor belt wear is very common, but if you can not solve this problem well, it may lead to more serious problems, so the majority of users should pay attention to this problem, also through the above analysis of white conveyor belt manufacturers, I believe you should also understand, what problems are also welcome to consult us.
Today is the related knowledge of Shandong conveyor belt wholesale compiled by Xiaobian. For more wonderful content, please click our website: http://www.ujkdbkh.cn Welcome to leave a message on the website, or call to communicate
聯系微信
