Conveyor belt is an important part of the conveyor, which accounts for more than half of the total cost of the conveyor, so it is particularly important for the conveyor belt of the assembly line how to maintain in the daily operation. Today our technician will give you an analysis of a very common conveyor belt maintenance, it is nylon conveyor belt.

尼龍輸送帶的保養和維護主要是以下幾點：

The maintenance of nylon conveyor belt mainly includes the following points:

1、給料方向應順膠帶的運行方向，為減小物料下落時對膠帶的沖擊應采溜槽，減小物料下落距離;膠帶受料段應縮短托輥間距和采用緩沖托輥為漏料，帶順應采用柔軟適度的擋料板，以免檔料板過硬，刮破輸送帶的帶面。

1. The feeding direction should be along the running direction of the belt. In order to reduce the impact of the material falling on the belt, the chute should be adopted to reduce the falling distance of the material; the distance between the rollers should be shortened in the receiving section of the belt, and the buffer roller should be used as the leakage material, and the soft and moderate baffle should be used to avoid the material baffle being too hard and scraping the belt surface of the conveyor belt.

2、不同類型、規格層數的輸送帶不宜接在一起使用，其接頭**采用膠接法。

2. The conveyor belts of different types and specifications should not be connected together, and their joints * * should be glued.

3、輸送膠帶運行速度一般不宜大于2.5米/秒，塊度大，磨損性大的物料和使用固定梨的卸料裝置應盡量采用低速。

3. In general, the running speed of conveyor belt should not be greater than 2.5 m / s. low speed should be used as far as possible for materials with large block size and wear and unloading device using fixed pear.

4、輸送帶在使用中應注意以下事項：①避免托輥被物料覆蓋，造成回轉不靈，防止漏料卡于滾筒與膠帶之間，注意活動部分的潤滑，但不得油污輸送膠帶;②避免帶負荷啟動;③膠帶發生跑偏，應用時采取措施糾正;④發現膠帶局部損人造棉應用時修補，以免擴大;

4. The following points should be paid attention to in the use of the conveyor belt: ① avoid the idler being covered by materials, resulting in ineffective rotation, prevent leakage from being stuck between the drum and the belt, pay attention to the lubrication of the moving part, but do not grease the conveyor belt; ② avoid starting with load; ③ take measures to correct the deviation of the belt; ④ repair the belt when it is found that it is damaged by human and cotton making, so as to avoid expansion;

5、輸送機的傳動滾筒直徑與輸送帶布層的關系、傳動滾筒、改向滾筒的配套以及對托輥槽角的要求應根據運輸機的設計規定，合理選取。

5. The relationship between the diameter of driving drum and the distribution of conveyor belt, the matching of driving drum and turning drum, and the requirements for groove angle of idler should be reasonably selected according to the design regulations of conveyor.

6、輸送膠帶的類型、結構、規格、層數應根據使用條件合理選用。

6. The type, structure, specification and number of layers of conveyor belt should be selected reasonably according to the use conditions.

關于食品級輸送帶http://www.ujkdbkh.cn  就先介紹到這里了，相信大家在實際的工作中會用到相關知識，如果您有這方面的需要，歡迎前來選購。

About food grade conveyor belt http://www.ujkdbkh.cn  First of all, I believe that you will use the relevant knowledge in the actual work, if you have the need in this respect, welcome to buy.