Improve the material, bearing capacity and core of the conveyor belt: the key to strengthen the material is the bearing capacity of the conveyor belt, determine the tensile strength and tensile modulus of the conveyor belt, maintain a good groove formed conveyor belt, conveyor belt, absorb the influence of the material, and maintain a relatively small conveyor belt, what is the relationship between the extended bearing capacity of the conveyor belt, conveyor belt structure?

　　綜合堆芯輸送帶

　　Integrated core conveyor

　　1. 分層布芯輸送帶主要由以下四部分組成:

　　1. Layered core conveyor belt mainly consists of the following four parts:

　　答:提高傳送帶材料(帶核心):加強材料的關鍵是傳送帶上的承載能力,這決定了傳送帶的拉伸強度和拉伸模量,保持良好的溝形成的傳送帶,吸收材料的影響,并保持一個相對較小的傳送帶的伸長。

　　A: improve the conveyor belt material (belt core): the key to strengthen the material is the bearing capacity on the conveyor belt, which determines the tensile strength and tensile modulus of the conveyor belt, maintains a good groove formed conveyor belt, absorbs the influence of the material, and maintains a relatively small conveyor belt extension.

　　B.輸送帶核心層膠(粘接):核心層膠使增強材料在織物層間具有良好的粘接強度，使用時防止芯材層壓。

　　B. Conveyor belt core layer adhesive (bonding): the core layer adhesive enables the reinforcement material to have good bonding strength between fabric layers, and prevents the core material from laminating when used.

　　c、上膠:上膠保證輸送帶的正常運行。它保護和加強材料，傳遞力量，運輸材料，吸收材料的沖擊，并抵抗磨損。特殊輸送帶用橡膠覆蓋，具有保溫、阻燃、耐酸、耐堿、耐油等化學劑和增強材料的腐蝕性;此外，橡膠包覆的輸送帶還具有增加摩擦系數的功能，可以實現大角度、大速度的輸送。

　　c. Gluing: gluing ensures the normal operation of the conveyor belt. It protects and strengthens materials, delivers strength, transports materials, absorbs material impact, and resists wear. The special conveyor belt is covered with rubber, which has heat preservation, flame retardance, acid resistance, alkali resistance, oil resistance and other chemical agents and corrosivity of reinforcement materials; in addition, the rubber covered conveyor belt also has the function of increasing friction coefficient, which can realize large angle and high speed transportation.

　　D.邊緣膠:邊緣膠的作用是保護加筋材料不受介質侵蝕，吸收輸送帶側面的擠壓壓力，防止帶芯分層。

　　D. Edge glue: the function of edge glue is to protect the reinforced material from medium erosion, absorb the extrusion pressure on the side of conveyor belt, and prevent the belt core from layering.

　　2. 鋼絲繩輸送帶的主要四部分如下:

　　2. The main four parts of the wire rope conveyor belt are as follows:

　　A.加強材料(鋼絲繩芯):鋼絲繩芯為輸送帶提供了較高的強度和較低的使用延伸率，因此鋼絲繩芯輸送帶適用于長距離、高強度、大功率的運輸。

　　A. Reinforced material (wire rope core): the wire rope core provides high strength and low service elongation for the conveyor belt, so the wire rope core conveyor belt is suitable for long-distance, high-strength and high-power transportation.

　　B.鋼絲繩芯膠(粘膠):芯層膠使鋼絲繩具有良好的粘接強度，能很好地傳遞應力，防止鋼絲繩芯在使用過程中被拉出。

　　B. Wire rope core glue (viscose): the core layer glue makes the wire rope have good bonding strength, can transfer the stress well, and prevent the wire rope core from being pulled out in the use process.

　　C.上膠:鋼絲繩輸送帶的上膠功能與布芯輸送帶相同，保證了輸送帶的正常運行。

　　C. Gluing: the gluing function of the wire rope conveyor belt is the same as that of the cloth core conveyor belt, which ensures the normal operation of the conveyor belt.

　　D.側膠:側膠可以保護和加強鋼絲繩外部介質的腐蝕，吸收輸送帶側面的擠壓壓力，防止鋼絲繩被拉出和外露。

　　D. Side glue: the side glue can protect and strengthen the corrosion of the external medium of the steel wire rope, absorb the extrusion pressure on the side of the conveyor belt, and prevent the steel wire rope from being pulled out and exposed.