耐高溫輸送帶的組成是不可缺少的經濟物資運輸，廣泛應用于運輸行業。它可以運輸散裝物料、塊狀物料、包裝箱等，但在帶式輸送機械的運輸過程中，經常會出現物料疏松等問題。散裝材料主要是分散在三個部分,分別為:傳送帶轉運站的傳送帶,傳送帶的空心部分的帶懸掛的腰帶,耐熱輸送帶在下滑的時候,下面我們介紹如何處理耐高溫輸送帶的問題:
The composition of high temperature resistant conveyor belt is an indispensable economic material transportation, which is widely used in transportation industry. It can transport bulk materials, bulk materials, packing boxes, etc., but in the process of transportation of belt conveyor, there are often problems such as material looseness. The bulk materials are mainly distributed in three parts: the conveyor belt of the conveyor belt transfer station, the belt hanging from the hollow part of the conveyor belt, and the heat-resistant conveyor belt when sliding. Here we introduce how to deal with the problem of the heat-resistant conveyor belt:
1. 耐高溫輸送帶點及轉載材料:點和轉載材料主要是因?yàn)槠л斔蜋C(jī)械料斗、進料槽等處的位置,如果負載過重,輸送機械將裙子,耐熱輸送帶的損壞的現象,為了避免上述情況的發生,我們建議可以調整在耐熱輸送帶的控制量,加強對于輸送機械和耐高溫輸送帶,維修和維護。
1. High temperature resistant conveyor belt point and transfer material: the point and transfer material are mainly due to the position of the hopper and feed chute of the belt conveying machinery. If the load is too heavy, the conveying machinery will damage the skirt and the heat-resistant conveyor belt. In order to avoid the above situation, we suggest that the control quantity of the heat-resistant conveyor belt can be adjusted to strengthen the control of the conveying machinery and the heat-resistant conveyor belt, Repair and maintenance.
2. 耐高溫輸送帶凹部分懸浮物質:這是由于凹部分可以帶掛起狀態,時間吃很容易會變成槽耐熱輸送帶,一旦輸送機械的坡口角度,將很容易使材料在輸送機械,一般冗余小傳送帶時選擇將材料容易發生散射現象。
2. Suspended substance in concave part of high temperature resistant conveyor belt: This is because concave part can be suspended, and time eating can easily become groove heat-resistant conveyor belt. Once the groove angle of conveyor machine, it is easy to make the material in the conveyor machine. Generally, when redundant small conveyor belt is selected, the material is easy to scatter.
3.耐高溫輸送帶打滑現象:當發生打滑時，主要是由于輸送帶在運行過程中兩側邊緣高度發生變化，一側高，另一側低。物料會從低處滑落，以免溢出，處理的方法是調整物料滑落。
3. Slip phenomenon of high temperature resistant conveyor belt: when slip occurs, it is mainly due to the change of edge height on both sides of the conveyor belt during operation, with one side high and the other side low. The material will slide down from the low place to avoid overflow. The treatment method is to adjust the material slide.
The above is sorted out and released by the manufacturer of high angle conveyor belt. For more information, please click the official website for consultation: http://www.ujkdbkh.cn
聯系微信
