What are the reasons why heat-resistant conveyor belts are mainly used in metallurgy, construction and other industries? Below are some conveyor belt manufacturers to introduce to you, I hope our introduction can help you better.

　　1. 輸送帶保護層采用三元乙丙橡膠，骨架材料采用國產耐高溫帆布。獨特的配方設計，解決了三元乙丙橡膠層間飽和度高、附著力差、附著力低等關鍵問題。壽命長(約2-4倍)，體輕，耐熱性好。輸送帶采用耐高溫輸送帶，物料溫度不超過800℃，表面溫度不超過220℃。主要用于冶金、建筑等行業輸送燒結礦、焦炭、水泥熟料等高溫物料。

　　1. Ethylene-propylene-diene rubber is used as the protective layer of conveyor belt, and domestic high-temperature canvas is used as the framework material. The unique formulation design solves the key problems of high interlayer saturation, poor adhesion and low adhesion of EPDM. Long life (about 2-4 times), light weight, good heat resistance. The conveyor belt adopts high temperature resistant conveyor belt. The material temperature does not exceed 800 ~C and the surface temperature does not exceed 220 ~C. Mainly used in metallurgy, construction and other industries to transport sinter, coke, cement clinker and other high-temperature materials.

　　2. 突出的耐熱輸送帶的特點是帶體輕、壽命長(約2-4倍)、耐熱性好。這是因為輸送帶的耐熱性以三元乙丙橡膠為封面層，骨架材料采用國內特有的耐高溫帆布，獨特的配方設計，解決了三元乙丙橡膠飽和度高、附著力差、層間附著力低的問題。耐熱輸送帶分為普通耐熱輸送帶和強耐熱輸送帶。普通耐熱熱帶強層為滌棉帆布(CC56)，耐熱熱帶強層為EP(具體為EP100、EP150、EP200、EP250、EP300、EP350、EP400等)。耐高溫輸送帶輸送燒結礦、焦炭、水泥熟料等高溫物料，在物料溫度不超過800℃、表面溫度不超過220℃的情況下使用。輸送帶主要用于冶金、建筑等行業。

　　2. The most prominent characteristics of heat-resistant conveyor belt are light body, long service life (about 2-4 times), good heat resistance. This is because the heat resistance of the conveyor belt takes EPDM as the cover layer, the skeleton material adopts the domestic special high temperature canvas, and the unique formula design solves the problems of high saturation, poor adhesion and low interlayer adhesion of EPDM. Heat-resistant conveyor belt is divided into ordinary heat-resistant conveyor belt and strong heat-resistant conveyor belt. Common heat-resistant tropical strong layer is polyester-cotton canvas (CC56), heat-resistant tropical strong layer is EP (EP100, EP150, EP200, EP250, EP300, EP350, EP400, etc.). High-temperature conveyor belt conveys sinter, coke, cement clinker and other high-temperature materials. It is used when the material temperature does not exceed 800 ~C and the surface temperature does not exceed 220 ~C. Conveyor belt is mainly used in metallurgy, construction and other industries.

　　通過輸送帶廠家介紹耐熱輸送帶主要用于冶金、建筑等行業你了解嗎?想要學習更多的輸送帶知識請繼續關注我們。

　　Through the introduction of conveyor belt manufacturers, heat-resistant conveyor belt is mainly used in metallurgy, construction and other industries. Do you know? If you want to learn more about conveyor belt, please continue to pay attention to us.