食品級輸送帶在食品行業的應用實際上是非常廣泛的，無論是在制作、運輸還是包裝環節，食品皮帶都是必不可少的。接下來小工就為您帶來一些在食品行業中食品輸送的例子。

　　The application of food-grade conveyor belt in the food industry is actually very extensive, whether in the production, transportation or packaging link, food belt is essential. Here are some examples of food delivery in the food industry.

　　食品級輸送帶輸送巧克力制品：巧克力制品通過食品輸送帶輸送，分流、運輸直包裝。

　　Food conveyor belt to transport chocolate products: chocolate products through the food conveyor belt transportation, diversion, transportation and finally packaging.

　　食品級輸送帶輸送黃油：黃油經過入口進入食品級擋板輸送帶，經爬坡后到達上方再進行下一次加工。

　　Food grade conveyor belt to transport butter: butter through the entrance into the food grade baffle conveyor belt, after climbing to the top of the next processing.

　　食品級輸送帶輸送面粉制品：面粉經過機器揉制之后倒入食品皮帶運輸下一加工環節。揉制定型后的面包面團經過加工處理后輸送下一加工環節。烘烤后的成品面包由輸送帶輸送集中，送下一環節由機械手打包包裝。

　　Food-grade conveyor belt conveying flour products: flour is kneaded by the machine and then poured into the food belt for transportation to the next processing link. After kneading, the bread dough is processed and transported to the next processing link. After baking, the finished bread is concentrated by the conveyor belt and sent to the next link by the manipulator for packaging.

　　食品級輸送帶輸送顆粒狀糖類食品：糖類在輸送帶上集中后通過食品皮帶傳送下一環節。顆粒狀食品糖類經過食品級輸送帶分流輸送進入下一加工環節。

　　Food grade conveyor belt to transport granular sugar: sugar is concentrated on the conveyor belt and then transferred to the next link through the food belt. Granular food sugars are shunted and transported by food-grade conveyor belt into the next processing link.

　　食品級輸送帶的使用常識:

　　Common sense of use of food grade conveyor belt:

　　食品加工輸送帶的使用溫度范圍為:-40°-120°C。請勿粘染油脂或其他化學品于食品加工輸送帶上。食品加工輸送帶安裝時工具或外力切勿直接施力于食品加工輸送帶上。食品加工輸送帶和帶輪應保持干凈不得沾有油和水。

　　The temperature range of food processing conveyor belt is -40°-120°C. Do not stick grease or other chemicals on food processing conveyor belt. Food processing conveyor belt installation tools or external force should not be directly applied to the food processing conveyor belt. Food processing conveyor belt and belt wheel should be kept clean and not stained with oil and water.

　　食品加工輸送帶安裝時，應檢查傳動系統，傳動軸與傳動輪是否垂直，傳動軸之間是否平行，傳動輪是否在一個平面上，如果不是，應當校正。不同類型的輸送帶其性能特點也不一樣，但是儲存以及使用的常識都是大同小異，希望該方法能對食品加工輸送帶運用的企業有所幫助。

　　Food processing conveyor belt installation, should check the transmission system, the drive shaft and the drive wheel is vertical, the drive shaft is parallel, the drive wheel is on a plane, if not, should be corrected. The performance characteristics of different types of conveyor belts are not the same, but the common sense of storage and use is much the same. I hope this method can help the enterprises using food processing conveyor belts.

　　食品級輸送帶在食品行業的應用就講到這里了，如果您想知道更多關于這方面的事項就來我們網站www.ujkdbkh.cn進行咨詢吧！

　　So much for the application of food-grade conveyor belt in the food industry. If you want to know more about this matter, come to our website www.ujkdbkh.cn for consultation!