In the era of fast-paced life, many production enterprises operate on assembly lines. At this time, conveyor belts come in handy. Conveyor belts are deeply loved by enterprise users because of their large conveying capacity, light weight, strong conveying capacity, simple structure and easy maintenance. However, the conveyor belt runs at high speed every day, which will inevitably lead to some faults, such as the problem of side ditch.

那么，輸送帶出現邊溝問題怎么解決?下面我們來跟著輸送帶廠家一起了解一下吧。

So, how to solve the problem of side ditch on the conveyor belt? Now let's follow the conveyor belt manufacturer to learn about it.

當輸送帶出現邊溝的問題時，我們應該從根本上找原因，出現這種問題的原因主要有兩個，一是配方;二是工藝。

When the conveyor belt has the problem of side ditch, we should find the root cause. There are two main reasons for this problem: one is the formula; Second, technology.

先說配方：是指邊膠的配方，其流動性欠佳，與貼膠及蓋膠不能達到共硫化;再說工藝;是指輸送帶帶坯成型工藝，帶坯側面不整齊，上邊膠工藝沒有按要求做，邊膠與帶坯之間有空隙，導致出現如上問題。

First, formula: it refers to the formula of edge glue, which has poor fluidity and can not achieve co vulcanization with adhesive paste and cover glue; Second, technology; It refers to the forming process of the belt blank of the conveyor belt. The side of the belt blank is not neat, the upper edge glue process is not done as required, and there is a gap between the edge glue and the belt blank, resulting in the above problems.

然后是硫化工藝：如果以上兩方面沒有問題，在硫化過程中，成槽寬度及壓縮比掌握(熟知并能運用) 不適宜也會出現邊部邊溝及邊膠脫空的現象。

Then comes the vulcanization process: if there are no problems in the above two aspects, during the vulcanization process, the groove width and compression ratio are not suitable (well-known and can be used), and the phenomenon of edge ditch and edge glue void will also occur.

輸送帶出現邊溝問題主要是關于邊膠的問題。

The side ditch problem of conveyor belt is mainly about the side glue.

1.邊膠沒有上好再加上壓縮比過小,缺料造成。

1. The edge glue is not well applied and the compression ratio is too small, resulting in material shortage.

2.邊膠沒有上好后造成硅油滲入形成分離界面。遇到輸送帶出現邊溝故障時，不要慌，檢查原因。平時也要注意定期檢修，做到早發現，早維修，減少出現故障的幾率，降低設備大修的次數，提高生產效率。

2. After the edge glue is not properly applied, silicone oil infiltrates to form a separation interface. In case of side ditch failure of conveyor belt, don't panic and check the cause. At ordinary times, we should also pay attention to regular maintenance, so as to find and repair early, reduce the probability of failure, reduce the number of equipment overhaul and improve production efficiency.

以上山東輸送帶的介紹就到這里了，希望能夠?qū)δ愕牧私庥兴鶐椭?/div>