As we all know, conveyor belt after a long time of use, there will be such a small temper, which conveyor belt fracture this phenomenon is not uncommon. So, after the conveyor belt fracture, next, small make up to give you a simple analysis.

輸送帶熱接，主要是指輸送帶通過加熱熱熔或者生膠片二次硫化把輸送帶接成環形的方法。這種接頭方法比較理想，牢固度非常穩定，接頭效率也比較高，其壽命也很長。但是其工藝比較繁瑣，接頭操作時間也相對比較長。

Conveyor belt hot joining mainly refers to the method of connecting the conveyor belt into a ring by heating, hot melting or secondary vulcanization of raw film. This kind of joint method is ideal, the firmness is very stable, the joint efficiency is relatively high, and its service life is also very long. However, the process is complicated and the joint operation time is relatively long.

輸送帶冷接，主要是指用膠水等粘合劑把輸送帶接成環形的方法。這種接頭方法速度比較快，但是由于膠水等粘合劑的穩定性，加上工藝條件比較難掌握，其牢固度不穩定，相對使用壽命比熱接差點。

Conveyor belt cold connection, mainly refers to the use of glue and other adhesives to connect the conveyor belt into a ring. This kind of joint method is fast, but because of the stability of glue and other adhesives, and the process conditions are difficult to grasp, its firmness is unstable, and its relative service life is worse than that of hot joint.

輸送帶接頭，除了上述的熱接和冷接之外，生活中比較常見的還有機械接駁。

Conveyor belt joint, in addition to the above hot and cold connection, there are more common mechanical connection in life.

輸送帶機械接駁，主要是指利用鋼扣、鉚釘、夾具等方式把輸送帶接成環形的方法。這種接頭方法在時間上占了很大的優勢，輸送帶也易于安裝。但是這種接頭方法會使輸送帶的平整度降低，也比較容易破損，更重要的是在使用的過程中，對于輸送帶的質量要求也是比較高的。因此，并不是所有設備都能適用輸送帶機械接駁的方式。

Conveyor belt mechanical connection, mainly refers to the use of steel buckle, rivets, fixtures and other ways to connect the conveyor belt into a ring. This joint method has a great advantage in time, and the conveyor belt is easy to install. But this joint method will reduce the flatness of the conveyor belt, and it is easy to be damaged. More importantly, in the process of use, the quality requirements for the conveyor belt are relatively high. Therefore, not all equipment can be applied to the mechanical connection of conveyor belt.

經過上述小編的簡單分析，相信大家對于輸送帶接頭是否一定要用熱接，有了一定的了解了吧。在輸送帶接頭方法上的選擇，我們要考慮輸送帶的使用環境，設備的要求，還有在使用過程中的便捷程度等等，結合綜合因素來選擇合適的輸送帶接頭方法。

After the simple analysis of the above small series, I believe you have a certain understanding of whether the conveyor belt joint must be hot connected. In the selection of conveyor belt joint method, we should consider the use environment of the conveyor belt, the requirements of the equipment, and the convenience in the process of use, and so on, combined with comprehensive factors to select the appropriate conveyor belt joint method.