1. Cold bonded joints. That is, cold adhesive is used for joint.

優點：這種接頭辦法比機械接頭的效率高，也比較經濟，應該可以有比較好的接頭效果，但是從實踐來看

Advantages: this joint method is more efficient and economical than mechanical joint. It should have better joint effect, but from the perspective of practice

缺點：由于工藝條件比較難掌握(熟知并能運用) ，另外粘合劑的質量對接頭的影響非常大，所以不是很穩定（解釋:穩固安定；沒有變動)。用冷粘膠粘接相當于輸送帶自身強度的40%-55%。

Disadvantages: because the process conditions are difficult to master (familiar and able to use), in addition, the quality of the adhesive has a great impact on the joint, so it is not very stable (explanation: stable and stable; no change). With cold adhesive bonding equivalent to 40% - 55% of the strength of the conveyor belt itself.

2、機械接頭。橡膠輸送帶有耐熱帶、耐磨帶、耐灼燒帶、耐油帶、耐堿帶、耐堿帶、耐熱帶、耐寒帶等特性。 主要用于各礦山、冶金、鋼鐵、煤炭、水電、建材、化工、糧食等企業的固體物料輸送。

2. Mechanical joint. Rubber conveyor belt has the characteristics of heat resistance, wear resistance, burning resistance, oil resistance, alkali resistance, alkali resistance, tropical resistance and cold resistance. It is mainly used for conveying solid materials in mines, metallurgy, steel, coal, hydropower, building materials, chemical industry, grain and other enterprises.

優點：一般是指使用皮帶扣接頭，這種接頭方法方便便捷，也比較經濟，聚氯乙烯和PVG整芯阻燃抗靜電（是一種處于靜止?fàn)顟B(tài)的電荷）輸送帶接頭中，一般8級帶以下的產品都采用這種接頭方法。

Advantages: it generally refers to the use of belt buckle joint, which is convenient, convenient and economical. In PVC and PVG whole core flame retardant and antistatic (it is a kind of static charge) conveyor belt joint, it is generally used for products below grade 8 belt.

不好的地方：但是接頭的效率低，容易損壞，對輸送帶產品的使用壽命有一定影響。用卡扣連接相當于輸送帶自身強度的28%-45%。

Bad place: but the efficiency of the joint is low, easy to damage, has a certain impact on the service life of the conveyor belt products. It is equivalent to 28% - 45% of the strength of the conveyor belt itself.

3、熱硫化接頭。

3. Hot vulcanized joint.

優點：實踐證明是更理想的一種接頭方法，可以保證高的接頭效率，同時也非常穩定（解釋:穩固安定；沒有變動)，接頭壽命也很長，容易掌握(熟知并能運用) 。輸送帶廠家是帶式輸送機的主要部件，主要用于煤炭、礦山、冶金、化工、建筑和交通等部門的大規模連續化運輸，運輸?shù)奈锪戏譃閴K狀、粉狀、糊狀和成件物品等。從微觀構成來看，輸送帶主要由骨架材料、覆蓋層及打底材料三大部分組成，其中覆蓋層為決定其性能及用途的關鍵部分。

Advantages: it has been proved to be the most ideal joint method, which can ensure high joint efficiency and is very stable at the same time (explanation: stable and stable; no change), long joint life, easy to master (familiar and able to use). Conveyor belt manufacturer is the main component of belt conveyor, which is mainly used for large-scale continuous transportation of coal, mining, metallurgy, chemical industry, construction and transportation departments. The materials transported are divided into block, powder, paste and finished products. From the microcosmic point of view, the conveyor belt is mainly composed of skeleton material, covering layer and backing material, and the covering layer is the key part to determine its performance and application.

不好的地方：但是存在工藝麻煩、費用高、接頭時間長等缺點。用機械熱硫化粘結相當于輸送帶自身強度的60%-80%。

Disadvantages: however, there are some disadvantages such as troublesome process, high cost and long joint time. Mechanical hot vulcanization bonding is equivalent to 60% - 80% of the strength of the conveyor belt itself.