1. Close the steam safety valve and adjust the working pressure according to the position of tightening equipment.

2、對機械設備，用塑膠包起來。

2. For mechanical equipment, wrap it in plastic.

3、將機器設備聯接。把清洗設備接220v交流電流。

3. Connect the machine and equipment. Connect the cleaning equipment to 220V AC current.

4、對輸送皮帶開展淋濕。（那樣做的目地是以便讓輸送帶能更強的消化吸收清理水溶液，清理更整潔。

4. Wet the conveyor belt. (the purpose of doing so is to make the conveyor belt more able to digest and absorb the cleaning solution, and clean it more cleanly.

5、將清理水溶液與水的占比以1：10結合，拌和勻稱。

5. Combine the proportion of cleaning solution and water in 1:10 and mix evenly.

6、用沖槍將清理水溶液勻稱的噴灑在輸送皮帶上。留意輸送皮帶的提升邊，不能用試過大的沖擊力，以防損害輸送帶。沖槍要一次性掃完，不必反復清洗。

6. Spray the cleaning solution evenly on the conveyor belt with a gun. Pay attention to the lifting edge of the conveyor belt. Do not use excessive impact force to prevent damage to the conveyor belt. It is not necessary to wash the gun repeatedly.

7、用冷水清洗。這一情況下要細心，那樣輸送帶的清理才會整潔。

7. Wash with cold water. In this case, be careful so that the conveyor belt can be cleaned clean.