High temperature resistant conveyor belt will appear peeling phenomenon after using for a period of time, which seriously affects the normal use and production efficiency of high temperature resistant conveyor belt. This chapter analyzes the causes of peeling phenomenon and preventive measures for all conveyor manufacturers.

　　耐高溫輸送帶剝落原因

　　Causes of peeling of high temperature resistant conveyor belt

　　1、芯糊塑化后經經紗卷粘臟，芯糊過塑不能很好地與面糊結合;

　　1. After the core paste is plasticized, it is dirty after warping, and the core paste can not be well combined with the batter if it is over plasticized;

　　2. 塑化劑在芯膏體中的沉淀降低了芯表面的附著力和強度。

　　2. The deposition of plasticizer in core paste reduces the adhesion and strength of core surface.

　　二、耐熱輸送帶防剝落措施

　　II. Anti peeling measures for heat resistant conveyor belt

　　1. ，檢查輸送帶是否與輸送帶設備相匹配或不匹配，這肯定會對輸送帶造成損壞。2. 輸送帶是否適合運輸此類貨物，是否適合在此類工作環境中工作。側面是否會影響輸送帶的使用壽命。這些都是決定輸送帶正常運行的因素。還要檢查輸送帶是否完好，問題是否得到妥善處理，以及輸送帶上的貨物擺放是否合理，這將直接影響輸送帶的運行。

　　1. First, check whether the conveyor belt matches or does not match the conveyor belt equipment, which will definitely cause damage to the conveyor belt. 2. Whether the conveyor belt is suitable for transporting such goods and working in such working environment. Whether the side will affect the service life of the conveyor belt. These are the factors that determine the normal operation of the conveyor belt. It is also necessary to check whether the conveyor belt is in good condition, whether the problems are properly handled, and whether the goods on the conveyor belt are placed reasonably, which will directly affect the operation of the conveyor belt.

　　2. 要求操作人員具備輸送設備操作和輸送帶維護的知識。一旦發現問題，應及時修復和處理，把危害扼殺在搖籃里。

　　2. Operators are required to have professional knowledge of conveyor equipment operation and conveyor belt maintenance. Once problems are found, they should be repaired and dealt with in time to strangle the hazards in the cradle.