Conveyor belts are widely used, of which the demand for heat-resistant conveyor belts is relatively large, but heat-resistant conveyor belts are a consumable, which will wear and tear if used for a long time. A wire rope conveyor belt manufacturer will introduce it to you.

　　1. 輸送帶開裂:主要受空間尺寸的限制，輸送帶彎曲次數較大;接頭硫化由于多種原因引起的硫化有兩種以上。導槽襯板與膠帶間隙不適當，造成異常磨損，或在間隙內嵌異物，造成異常磨損或劃傷。導槽處物料流量與輸送帶速度不一致，下降較大，加速了橡膠表面的磨損。輥筒損壞，導致膠帶異常磨損或劃傷。皮帶打滑，也會造成膠帶的異常磨損。

　　1. Conveyor belt cracking: mainly limited by space size, conveyor belt bending times are larger; joint vulcanization due to a variety of reasons caused by more than two kinds of vulcanization. The gap between guide groove liner and tape is inappropriate, resulting in abnormal wear or foreign body embedded in the gap, resulting in abnormal wear or scratch. The material flow rate at the guide groove is not consistent with the speed of the conveyor belt, which decreases greatly and accelerates the wear of the rubber surface. Roller damage, resulting in abnormal wear or scratch of tape. The slippage of belt will also cause abnormal wear and tear of belt.

　　2. 耐高溫輸送帶縱向撕裂:主要是由于振動和沖擊導致緊固件松動脫落，導致落煤管襯板和導板脫落。外來物質混合在材料中，材料是硬的、硬的、有邊的、有邊的。

　　2. Longitudinal tearing of high temperature resistant conveyor belt: It is mainly due to vibration and impact that the fasteners loose and fall off, leading to the falling coal pipe liner and guide plate fall off. Foreign materials are mixed in materials, which are hard, hard, edged and edged.

　　3、輸送帶裂紋:主要是由于輸送帶的老化，輸送帶運行時間長，因為老化往往導致輸送帶開裂。另外可能選擇的輸送帶也是不合適的。

　　3. Conveyor belt cracks: mainly due to the aging of conveyor belt, conveyor belt running time is long, because aging often leads to conveyor belt cracking. In addition, the possible choice of conveyor belt is also inappropriate.

　　通過對鋼絲繩輸送帶生產廠家的介紹，得出了輸送帶耐熱的效果?你知道有什么損失嗎?希望我們的介紹能對您有幫助

　　By introducing the manufacturer of wire rope conveyor belt, the heat-resistant effect of the conveyor belt is obtained. Do you know what the loss is? I hope our introduction will be helpful to you.