What is the knowledge of tubular steel cord conveyor belt? Below is a food-grade conveyor belt factory to introduce to you, I hope our introduction can better help you.

　　1. 普通鋼絲繩芯輸送帶由上包膠、鋼絲繩芯、下包膠和側包膠組成。鋼絲繩按一定間隙均勻排列。由于鋼絲繩芯輸送帶在直線運輸過程中需要設置匝數，傳統的鋼絲繩芯輸送帶與鋼絲繩間距分布均勻，相對致密且強度大，不易設置成彎曲形狀。此外，在輸送帶轉彎的過程中，應考慮轉彎半徑，過大的轉彎半徑會使輸送的物料向外滾壓導致飛濺。

　　1. Common steel cord conveyor belt is composed of upper glue, steel cord, lower glue and side glue. Wire ropes are arranged evenly according to a certain clearance. Because the number of turns of steel cord conveyor belt needs to be set in the process of linear transportation, the distance between the traditional steel cord conveyor belt and the steel wire rope is evenly distributed, relatively dense and strong, so it is not easy to set into a bending shape. In addition, in the process of conveyor belt turning, the turning radius should be considered. Excessive turning radius will cause the conveyor material to roll outward and cause spatter.

　　考慮到管狀輸送帶可以在小半徑的三維空間內實現轉彎，避免中間換乘站;在運輸作業中，

　　Considering that the tubular conveyor belt can turn in a small radius of three-dimensional space to avoid the intermediate transfer station, in transport operations,

　　2、物料被包裹在管道中，在設計制造中需要考慮剛性要求，并增加物料與輸送帶之間的擠壓壓力，因此輸送帶的運行阻力系數大于一般的帶式輸送機。因此，平帶運輸可與管狀運輸相結合，使鋼絲繩芯輸送帶在運行過程中可轉化為管狀運輸。所以我們可以減少鋼絲繩兩端的根數，增加兩端的間距，這樣鋼絲繩就可以彎曲成管狀。然而，兩端根數的減少不可避免地會導致兩端強度的降低，這很容易導致管道在管狀部位發生坍塌。為了解決這個問題，我們可以在這里添加一個加固層來增加橫向剛度，即在包覆膠和鋼絲繩之間加入鋼絲網，鋼絲網分為斜交鋼絲網。

　　2. Material is wrapped in pipeline. In design and manufacture, rigidity requirements should be considered, and the extrusion pressure between material and conveyor belt should be increased. Therefore, the resistance coefficient of conveyor belt is larger than that of general belt conveyor. Therefore, flat belt transportation can be combined with tubular transportation, so that the steel cord conveyor belt can be converted into tubular transportation in the process of operation. So we can reduce the number of roots at both ends of the wire rope and increase the distance between the two ends so that the wire rope can be bent into tubular shape. However, the reduction of the number of elements at both ends will inevitably lead to the reduction of the strength at both ends, which can easily lead to the collapse of the pipeline in the tubular part. To solve this problem, we can add a reinforcement layer here to increase the transverse stiffness, that is, to add a wire mesh between the coated rubber and the wire rope, which is divided into oblique wire mesh.

　　通過對鋼絲繩輸送帶生產廠家的介紹，管狀鋼絲繩芯輸送帶你了解了嗎?想要學習更多的輸送帶知識，請繼續關注我們:http://www.ujkdbkh.cn

　　By introducing the manufacturer of wire rope conveyor belt, do you understand the tubular steel rope core conveyor belt? If you want to learn more about the conveyor belt, please continue to pay attention to us: http://www.ujkdbkh.cn