大傾角輸送帶的主要部件是滾子部件，因此產品在選型時必須特別注意該部件的設計。接下來我們來看看大傾角帶式輸送機輥筒的選擇技巧。
Roller parts are the main parts of belt conveyor with large inclination, so the design of this part must be paid special attention to in the selection of products. Next, let's look at the selection techniques of rollers for belt conveyors with large inclination.
1. 滾筒壁厚和軸徑的選擇:輸送物料的重量均勻地分布在接觸的滾筒上，計算每個滾筒所需的承載能力，從而確定滾筒壁厚和軸徑;
1. Choice of the thickness and diameter of the drum: The weight of the conveying material is evenly distributed on the contact drum, and the bearing capacity of each drum is calculated to determine the thickness and diameter of the drum.
2. 滾筒長度選擇:對于不同寬度的貨物，應選擇合適寬度的滾筒。輸送物料一般在50mm左右。
2. Drum length selection: For goods with different widths, the appropriate width of the drum should be selected. The conveying material is usually about 50 mm.
滾筒材料與表面處理:根據運輸環境的不同，確定滾筒材料與表面處理。
Drum material and surface treatment: According to the different transportation environment, determine the material and surface treatment of the drum.
說了這么多關于大傾角皮帶機的知識，也不知道我們是否了解它。如果您有任何問題，請與我們的工作人員聯系。
Having said so much about the high-angle belt conveyor, I don't know whether we know it or not. If you have any questions, please contact our staff.
在高傾角帶式輸送機的安裝和鋪設過程中,由于設備的不均勻?qū)酉锏?在不同的位置會有凹凸,所以整體的承載帶應集中在一些設備的懶漢,當材料傳輸太重,很容易造成損害的懶漢設備,影響順利生產。
In the process of installation and laying of high inclined belt conveyor, because of the uneven roadway of equipment, there will be concave and convex in different locations, so the whole bearing belt should be concentrated on the lazy men of some equipment. When the material transmission is too heavy, it is easy to cause damage to the lazy men equipment, affecting the smooth production.
因此,合理調整的大傾角帶式輸送機縱向坡度,以緩解的凹凸部分底座,凸曲線狀態,應力集中的位置可以增加套軸承滾子的重托,以確保整個皮帶和輥每組可以得到良好的接觸,在一定程度上,應力集中,保證大傾角帶式輸送機縱向坡度合理,倒帶運行。
Therefore, the reasonable adjustment of the longitudinal gradient of the belt conveyor with large inclination can alleviate the concave-convex part of the base, the convex curve state, and the position of stress concentration can increase the heavy support of the sleeve bearing roller, so as to ensure that the whole belt and the rollers can get good contact, to a certain extent, eliminate the stress concentration, ensure the reasonable longitudinal gradient of the belt conveyor with large inclination and the operation of the inverted belt.
For more information, click on the official website: http://www.ujkdbkh.cn.
聯系微信
