We believe that the purpose of buying conveyor belt belt is the same, that is, hope to improve work efficiency through it, so that the production profit increase. So how to improve the efficiency of shandong conveyor belt belt? In addition to choosing good quality conveyor belt belt, we should also pay attention to the following points.

　　輸送帶在運輸過程中需要嚴格控制。輸送物料時，如果要輸送的物料過多，就會出現各種問題，比如輸送帶斷裂或劃傷等。到位，不合格的情況會出現各種問題。因此，需要嚴格控制運輸量。

　　Conveyor belts need to be strictly controlled during transportation. When conveying materials, if the material to be transported is too much, there will be various problems, such as conveyor belt fracture or scratch. In place, unqualified situations will appear all kinds of problems. Therefore, strict control of traffic volume is needed.

　　嚴格控制輸送帶尺寸，避免出現問題。山東輸送帶皮帶的寬度取決于具體的工作環境來確定具體的規格。一般我們可以使用各種規格的輸送帶產品。輸送帶根據物料輸送和運輸條件確定。端口太多肯定會斷裂，影響輸送帶的正常使用。

　　Strictly control conveyor belt size to avoid problems. Shandong conveyor belt belt width depends on the specific working environment to determine the specific specifications. Generally we can use various specifications of conveyor belt products. The conveyor belt is determined according to the material conveying and transportation conditions. Too many ports will definitely fracture, affecting the normal use of the conveyor belt.

　　輸送中使用時，如缺少托輥，應及時補充修理；托輥被物料覆蓋，會造成轉動無效，防止托輥與皮帶之間漏料，注意潤滑輸送帶的運動部件，但輸送帶上不能有油污。

　　When used in transportation, such as the lack of roller, should be timely supplemented repair; The roller is covered by material, which will cause invalid rotation. To prevent material leakage between the roller and the belt, pay attention to lubricating the moving parts of the conveyor belt, but there can be no oil pollution on the conveyor belt.

　　合理使用輸送帶會好很多。根據運輸情況，合理使用輸送帶，不得超載，使托輥和輸送帶更好，避免各種跑偏等問題，保證正常運輸。我們控制這些物料的輸送節奏，不能快也不能慢，以免突然出現各種問題和輸送帶嚴重磨損。裝卸時，應妥善保養輸送帶，以充分利用。

　　The proper use of conveyor belts would be much better. According to the transportation situation, the reasonable use of conveyor belt, not overload, so that the idler and conveyor belt better, avoid all kinds of deviation and other problems, to ensure normal transportation. We control the conveying rhythm of these materials, neither fast nor slow, in order to avoid sudden problems and serious wear of the conveyor belt. During loading and unloading, the conveyor belt should be properly maintained to make full use of it.

　　進料方向應沿輸送帶運行方向。為減少物料對輸送帶的影響，應采用溜槽，減小物料的間隙距離；對于輸送帶的物料部分，應縮短托輥、緩沖托輥之間的距離，用于泄漏和輸送。皮帶采用柔軟適中的擋板，避免刮傷輸送帶表面，以免影響齒板質量。

　　Feeding direction should be along the conveyor belt running direction. In order to reduce the impact of materials on the conveyor belt, the chute should be used to reduce the clearance distance of materials; For the material part of the conveyor belt, the distance between rollers and buffer rollers should be shortened for leakage and transportation. The belt adopts soft baffle to avoid scratching the surface of the conveyor belt, so as not to affect the quality of the tooth plate.

　　上述就是山東輸送帶皮帶的工作效率如何提高問題的一些介紹，相信對大家應該會有所幫助。只有平時做好維護和保養，輸送帶才能好好的正常運轉工作。更多內容就來網站http://www.ujkdbkh.cn咨詢吧！

　　The above is how to improve the efficiency of shandong conveyor belt belt some introduction, I believe that you should be helpful. Only do good maintenance and maintenance at ordinary times, the conveyor belt can work properly. More content to http://www.ujkdbkh.cn consultation!