What should be paid attention to in the application of conveyor belt? The customer's basin friend will not be very clear, so we need the professional technical personnel of the conveyor belt manufacturer to introduce it to you

　　1、輸送帶運作速率一般不適合超過2.5m/s，塊度大，磨損性大的原材料和應用固定不動梨的倒料設備應盡可能選用低速檔。

　　1. Generally, the operation speed of the conveyor belt is not suitable for raw materials with large block size and abrasiveness, which are more than 2.5 m / s, and the feeding equipment with fixed pears should be selected as low-speed gear as possible.

　　2、輥筒輸送機的傳動滾筒直徑與輸送帶布層的關聯、傳動滾筒、改向滾筒的配套設施及其對緩沖托輥槽角的規定應依據重型直升機的設計方案要求,有效選擇。

　　2. The connection between the diameter of the driving roller of roller conveyor and the cloth layer of the conveyor belt, the supporting facilities of the driving roller and the direction changing roller and the provisions for the groove angle of the buffer idler shall be effectively selected according to the design requirements of the heavy helicopter.

　　3、給料機方位應順輸送帶的運作方位，為減少原材料降落時對輸送帶的沖擊性應采煤斗，減少原材料起伏間距；輸送帶受料段，應減少緩沖托輥間隔和選用緩存緩沖托輥為溢料，輸送帶切合選用綿軟適當?shù)膿趿习?，以防檔料板扎實，刮破輸送帶的尼龍輸送帶帶面。

　　3. The feeder orientation shall be in line with the operation orientation of the conveyor belt. In order to reduce the impact on the conveyor belt when the raw material falls, the coal hopper shall be used to reduce the fluctuation spacing of the raw material. In the receiving section of the conveyor belt, the buffer idler interval shall be reduced and the buffer idler shall be selected as the overflow material. The conveyor belt shall be suitable for the selection of soft and appropriate baffle plate to prevent the solid baffle plate from scraping the nylon conveyor belt surface of the conveyor belt.

　　4、皮帶輸送機在應用時，對于緩沖托輥缺乏，應立即加上及修完，緩沖托輥被原材料遮蓋，導致旋轉不靈敏，避免溢料卡于滾桶與膠布中間，留意輸送帶主題活動一部分的潤化，但不可油漬輸送帶。

　　4. In the application of belt conveyor, for the lack of buffer idlers, they should be added and repaired immediately. The buffer idlers are covered by raw materials, resulting in insensitivity of rotation, avoiding overflow stuck between the drum and the rubber cloth, paying attention to the embellishment of a part of the theme activity of the conveyor belt, but not oil stained conveyor belt.

　　5、防止輸送帶遭到聲卡機架，支撐或小塊原材料的阻礙，避免刮破扯裂，發覺輸送帶部分損壞時，運用人造棉布料立即修復，以防擴張。

　　5. Prevent the conveyor belt from being blocked by the sound card frame, support or small raw materials, and avoid scratching and tearing. If it is found that the conveyor belt is partially damaged, use the artificial cotton cloth to repair it immediately to prevent expansion.

　　根據輸送帶廠家的技術人員給大伙兒詳細介紹輸送帶應用中應當留意那幾個方面你學好了沒有？想要了解更多相關信息可以點擊：http://www.ujkdbkh.cn

　　According to the conveyor belt manufacturer's professional and technical personnel to introduce the conveyor belt application in detail, which aspects should be paid attention to, have you learned well? For more information, please visit: http://www.ujkdbkh.cn