Recently, many customers have asked about the selection of conveyor belt roller and conveyor belt, and then the relationship between conveyor belt and roller, this paper makes some brief instructions.

　　，輸送帶越厚，相應滾筒的直徑越大。這涉及到輸送帶能否正常運行以及輸送帶的使用壽命。

　　First, the thicker the belt, the larger the diameter of the corresponding drum. This involves whether the conveyor belt can operate normally and the service life of the conveyor belt.

　　接下來，我們將討論輸送帶日常運行過程中的一些問題。針對這些問題，我們將分析輸送帶與滾筒之間的關系。

　　Next, we will discuss some problems in the daily operation of conveyor belt. To solve these problems, we will analyze the relationship between conveyor belt and roller.

　　1. 輸送帶偏差

　　1. Conveyor belt deviation

　　輸送帶在輸送設備上跑偏是一種非常普遍的現象。從輸送帶與滾筒之間的配合來看，我們可以在調整輸送帶的前提下考慮使用圓弧滾筒?；⌒螡L筒可以改變輸送帶的整體受力，保證輸送帶在滾筒的運行

　　It is a very common phenomenon that the conveyor belt deviates on the conveying equipment. From the point of view of the cooperation between the conveyor belt and the roller, we can consider using the arc roller on the premise of adjusting the conveyor belt. The arc roller can change the overall stress of the conveyor belt and ensure the conveyor belt to run in the center of the roller

　　2. 傳送帶打滑了

　　2. Belt slipping

　　這里所說的輸送帶打滑可以分為兩種情況:

　　The belt slip mentioned here can be divided into two situations:

　　在種情況下，新安裝的輸送帶打滑或滾筒不轉動。打滑的原因可能是滾筒的直徑太小，造成打滑現象。在另一種情況下，傳送帶沒有張緊。

　　In the first case, the newly installed conveyor belt slips or the drum does not rotate. The reason for the slipping may be that the diameter of the roller is too small, causing the slipping phenomenon. In another case, the belt is not tensioned.

　　第二種情況下,輸送機使用現象,滾子和皮帶滑了很長一段時間,所以這種情況的可能原因是,在輥運行很長一段時間,導致明亮輥表面的摩擦力變得較小,或摩擦力由輥磨損模式變得越來越小。

　　In the second case, the roller and belt slide for a long time due to the use of the conveyor, so the possible cause of this situation is that the friction force on the bright roller surface becomes smaller and smaller after a long period of roller operation, or the friction force becomes smaller and smaller from the roller wear mode.

　　3.輸送帶損壞

　　3. The conveyor belt is damaged

　　這第三點輸送帶斷裂不是滾筒的主要問題。這種情況的出現主要是輸送帶的承載能力不夠，輸送帶的選擇過薄。經過這樣的問題，我們主要考慮在滾筒直徑允許的情況下使用較厚的輸送帶產品。

　　The third point is that the belt fracture is not the main problem of the drum. The main reason for this situation is that the carrying capacity of the conveyor belt is not enough and the selection of the conveyor belt is too thin. After such a problem, we mainly consider the use of thick conveyor belt products when the drum diameter allows.

　　以上就是對輕輸送帶和滾筒那些東西的總結，如果沒有總結，或者有錯的地方希望及時提出，大家一起商量，共同積累，共同進步。如果輸送帶有問題需要咨詢，可以聯系我們。

　　The above is the summary of the light conveyor belt and roller. If there is no summary, or there is something wrong, I hope to put it forward in time. We will discuss together, accumulate together and make progress together. If you have any questions about conveyor belt, please contact us.