The nylon conveyor belt will break because of wear and tear after using for a period of time. At this time, nylon conveyor belt should be bonded. But in practical application, the bonding effect is not ideal, which brings troubles to many enterprises. This chapter is to analyze the factors that influence the bonding effect of conveyor belt manufacturers.

　　1、溶劑揮發率:一般來說，揮發越快，初粘性越大，初粘性強度越高。

　　1. Solvent volatilization rate: Generally speaking, the faster volatilization, the greater the initial viscosity, the higher the initial viscosity strength.

　　2. 溫度:一般來說，溫度越高，固化速度越快，固化程度越高，粘結強度越大。

　　2. Temperature: Generally speaking, the higher the temperature, the faster the curing speed, the higher the degree of curing, the greater the bond strength.

　　3.濕度:一般來說，濕度越大，固化越慢，固化程度越差，粘結強度越小。

　　3. Humidity: Generally speaking, the higher the humidity, the slower the curing, the worse the curing degree and the smaller the bonding strength.

　　4. 粘接劑界面清洗干燥程度:粘接劑溶液越清潔干燥，織物越飽和，粘結力越強。

　　4. Degree of interface cleaning and drying: The cleaner the adhesive solution is, the more saturated the fabric is, the stronger the bonding force is.

　　5、施加在搭接表面的壓力:壓力越大，越均勻，粘接繼電器越強

　　5. Pressure applied to overlap surface: The greater the pressure, the more uniform the relay is, the stronger the bonding relay is.

　　6. 搭接接頭之間的粘接程度:粘接越緊密，粘接越強。

　　6. Degree of bonding between lap joints: The closer the bonding is, the stronger the bonding is.

　　通過輸送帶廠家為大家分析什么因素會影響尼龍輸送帶的粘接效果你知道嗎?我希望我們的介紹能幫助你更好的生活。

　　Through the conveyor belt manufacturers for you to analyze what factors will affect the bonding effect of nylon conveyor belt, you know? I hope our introduction can help you better life.