We all know that conveyor belts can not be connected to use, connecting conveyor belts can be used, but some people in a shorter period of time when the conveyor belt will crack, or fracture, generally occurs in the joint. Why is that?

　　由于輸送帶接頭的強度通常比帶體接頭的強度弱，同時，由于接頭方法的不同，接頭的強度也不同。

　　Because the strength of conveyor belt joints is usually weaker than that of belt body joints, and because of different joint methods, the strength of joints is also different.

　　一般機械接頭，接頭強度較低，只能達到人體強度的40%~50%，而冷液則稍好一些，接頭強度可以達到60%~70%，好是熱熔接頭，接頭強度可以達到80%~90%。(PVC、PU輸送帶不能使用冷膠)。

　　Generally mechanical joints have low strength, which can only reach 40%-50% of the strength of human body, while cold liquid is slightly better. The strength of joints can reach 60%-70%, preferably hot-melt joints. The strength of joints can reach 80%-90%. (PVC, PU conveyor belt can not use cold glue).

　　為了達到好的聯合力量,熱熔方法通常被用來使皮帶,但是因為它是直接做成帶,所以有時在安裝,它不方便,安裝一些設備可能不是,在這種情況下,很多人會選擇使用機械關節,安裝方便。所以選擇您自己的連接器。

　　In order to achieve the best joint strength, the hot melt method is usually used to make the belt, but because it is directly made into the belt, sometimes it is inconvenient to install, install some equipment may not be, in this case, many people will choose to use mechanical joints, easy to install. So choose your own connector.

　　當然，如果您因為設備或其他原因不能使用現成的帶，但又不想使用機械連接器，明誠還提供現場服務幫助您現場連接!

　　Of course, if you can't use the ready-made tape because of equipment or other reasons, but don't want to use mechanical connectors, sincerely provide on-site services to help you connect on-site!