Conveyor belt handling is often neglected. The conveyor belt must be handled carefully. Many people throw the conveyor belt out of the car, which may cause damage to the side or surface of the conveyor belt.

　　卸料過程中輸送帶應盡量保證平穩著陸，不要使一端接觸地面。卸料時不要讓卡車滾動，滾動的輸送帶會使其結構松散，難以清理。卸車的佳方式是用叉車將傳送帶固定在叉車上并固定好。禁止叉車叉頭與線圈接觸，直接損壞線圈。

　　In the unloading process, the conveyor belt should try its best to ensure a smooth landing and not make one end touch the ground. Don't let the truck roll when unloading. Rolling conveyor belt will make its structure loose and difficult to clean. The best way to unload the truck is to fix the conveyor belt on the forklift truck and fix it well. Forklift forklift forklift head is prohibited from contacting with coil and directly damaging coil.

　　暴力搬運必須杜絕，手工搬運不是好的方式。移動傳送帶的好方法是使用起重機，這樣可以平穩地抬起傳送帶。在此過程中，鋼絲繩不應損壞輸送帶的邊緣。必須注意操作過程的平穩，只有平穩才能對輸送帶起到保護作用。暴力處理是不可取的，以暴力處理換取的不是效率，而是更大的損失。

　　Violent handling must be eliminated, manual handling is not the best way. The best way to move the conveyor belt is to use a crane, which can lift the conveyor belt smoothly. In this process, the wire rope should not damage the edge of the conveyor belt. We must pay attention to the smooth operation process. Only the smooth operation can protect the conveyor belt. It is not advisable to deal with violence. It is not efficiency but greater loss that is exchanged for by dealing with violence.

　　許多行業都采用輸送帶，便捷的優勢是物料的短距離運輸。在此，我們討論了輸送帶的連接方法。一般輸送帶連接方式有機械連接、熱硫化連接、冷粘合連接。

　　Conveyor belts are used in many industries. The advantages of high efficiency and convenience are the first choice for short-distance transportation of materials. Here, we discuss the connection method of conveyor belt. General conveyor belt connection methods include mechanical connection, hot vulcanization connection and cold bonding connection.

　　輸送帶的連接是影響輸送帶正常工作的重要因素。將輸送帶連接成環形是必要的，并且連接要非常光滑，這樣才能保證物料的順利運輸。

　　The connection of conveyor belt is an important factor affecting the normal operation of conveyor belt. It is necessary to link the conveyor belt into a ring and the connection should be very smooth so as to ensure the smooth transportation of materials.

　　機械連接是利用機械上的輸送帶皮帶扣。這種方法是常見和經濟的，但它降低了傳送帶的壽命。熱硫化連接輸送帶連接作為一種理想的方法，連接點過光滑，連接的使用壽命相對較長。但在技術上，整個運營過程更加負責，項目成本相對較高。冷粘接的方法是用膠粘劑進行粘接，這個過程效率更高，介于上述兩者之間，整個粘接過程不太容易掌握。

　　Mechanical connection is the use of conveyor belt buckles on machinery. This method is the most common and economical, but it reduces the life of the conveyor belt. As an efficient and ideal method, hot vulcanization connection of conveyor belt has smooth connection points and relatively long service life. But technically, the whole operation process is more responsible and the project cost is relatively high. The method of cold bonding is to use adhesives to bond. This process is more efficient, between the two, and the whole bonding process is not easy to grasp.